KAM KMD14.2 Instruction Manual

KAM KMD14.2 Instruction Manual Manual pdf 2 page image

Thank you for purchasing this product, we are sure that it will serve you for many years to come.To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with thebasic operations of this unit. After you have read the instructions, please retain them for future reference.This unit has been tested at the factory before being shipped to you.To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. To prevent a fire hazard, do notexpose the unit to any naked flame sources. Unplug this apparatus during lightning storms or if it is unlikely to be used for longperiods of time.When installing the unit, please ensure you leave enough space around the unit for ventilation. Slots and openings in the unit areprovided for ventilation to ensure reliable operation of the product and to protect it from overheating. To prevent fire hazard, theopenings should never be blocked or covered.Always handle the power cable by the plug. Never pull out the plug by pulling on the cable. Never touch the power cable whenyour hands are wet as this could cause an electric shock. Do not tie a knot in the cable. The power cable should be placed suchthat it is not likely to be stepped on. A damaged power cable can cause a fire or give you an electrical shock. Checkthe power cord periodicaly, if you ever find that it is damaged, replace it before using the unit again. Contact your retailer for areplacement.The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the areawhere this unit is to be used meets the required written on the unit.The lightning flash symbol inside a triangle is intended to alert the user to the presence high voltage within the unit’senclosure that may be of sufficient power to constitute a risk of electrical shock to persons.Caution: to prevent the risk of electric shock, do not attempt to open the unit. No user-serviceable parts inside. Refer allservicing to qualified service personnel.The exclamation mark inside a triangle is intended to alert the user to the presence of important operating andmaintenance instructions in the literature accompanying the appliance.Any modification carried out on the unit may invalidate the unit’s warranty.If applicable, only use the stand, tripod or bracket specified or sold with the apparatus.Select the installation location of your unit carefully. Avoid placing it in direct sunlight or locations subject to vibration andexcessive dust. Do not use the unit where there are extremes in temperature (below 41ºF / 5ºC or exceeding 95ºF / 35ºC).Unpacking and safety: Please unpack your new product carefully, your new product should reach you in perfect condition. Pleasecheck that no damage has occurred during transit. If any damage is found, do not operate your unit. Please contact the retaileryou purchased it from immediately. If there is any damage to the mains cable do not use the device. Always disconnect the unitfrom the mains supply when carrying out any servicing or cleaning of the unit.The serial number for this equipment should be located on the rear or underside of the unit. Please make a note of this number asyou will need it for your warranty, it is a good idea to keep a copy of the serial number for your own records.