Kärcher K7000G Operator's Manual

Also see for K 7000 G: Operator's manual

Contents

Kärcher K7000G Operator's Manual Manual pdf 3 page image

4Step 5 Slide the throttle control to the fastposition. Move the choke lever to the “CHOKE”position (only if the engine is cool). After starting,move the choke to “RUN”. Turn fuel valve to “ON”.Step 6 Pull the starter handle. Ifthe engine fails to start after 3 pullssqueeze the trigger gun to releasepressure, and repeat step 6.OPERATING INSTRUCTIONSStep 1 Connect the high pressure hoseto the unit’s high pressure outlet.Step 3 Connect garden hose tothe cold water source and turn wateron completely.Step 2 Connect garden hose to unit’swater inlet.Step 4 Trigger the gun to eliminate trapped air,wait for a steady flow of water to emerge from thespray nozzle.Tools required. adjustable pliers.3ASSEMBLY INSTRUCTIONSStep 6 Check oil level. Oil level should beto the oil filler neck. Be sure the machine islevel when checking the oil level. (Refer to theengine’s operating manual for seasonal grades.)Step 7 Fill gas tank with unleadedgasoline. Do not use leaded gasoline.Important! Do not run the engine with a high or low oil level as this can causeengine damage. If you have further questions regarding the engine, please refer to theengine’s operating manual included with the unit.Step 1 Tilt machine back-wards slightly (caution: oil mayleak if tilted too far). Attach thefront guard to the frame. Alignholes, insert bolt and tightenwith lock nut.Step 4 Attach the triple jet nozzle to thespray wand.Step 5 Attach the spray wand to thetrigger gun.Step 2 Attach the handleto the frame of the pressurewasher. Align holes, insert bolt,and tighten with knob.Step 3 Attach highpressure hose totrigger gun.K7000G Manual 11/30/01 5:04 PM Page 4