Kärcher K 5.65 Operator's Manual

Also see for K 5.65: Operator's manual

Contents

Kärcher K 5.65 Operator's Manual Manual pdf 7 page image

English 7 STEP 9:Install the supplied connector to theunit’s water inlet.Note: Never attach the garden hoseconnector to the unit’s water inlet! STEP 10:Insert one end of the high pressurehose into the trigger gun until it locksaudibly.Note: Make sure the connection nip-ple is aligned correctly. Check theconnection by pulling on the highpressure hose.Check the secure connection by pull-ing on the high pressure hose.Disconnect: Press the disconnect key on the trig-ger gun and remove the high pres-sure hose from the trigger gun. STEP 1:Insert one end of the high pressurehose tightly into the quick connect onthe unit, it will lock in audibly.Note: Make sure the connection nip-ple is aligned correctly. Check theconnection by pulling on the highpressure hose.Check the secure connection by pull-ing on the high pressure hose. STEP 2:Insert the spray wand of your choiceinto the trigger gun. Press in againstthe spring tension and twist intolocked position. STEP 3:Screw the supplied garden hose con-nector on to the end of your gardenhose.OPERATING INSTRUCTIONS