Kärcher HDS 5/11 U Service Manual

Also see for HDS 5/11 U: User manual Instructions Original instructions Manual Manual

Contents

Kärcher HDS 5/11 U Service Manual Manual pdf 23 page image

English 5.906-487.0 Rev. 00 (04/10) 23The entire top part must be removed to gain accessto the high pressure pump.A workshop lifting platform is recommended for thisprocedure.Also see chapter 6.1Brief overview, dismantling / as-sembly. Completely unwind the high pressure hose. Pull out the safety clip.1 high pressure hose2 Safety clip3 High pressure outlet, hose drum4 Hose drum Pull the high pressure hose out of the high pres-sure outlet.1 high pressure hose2 Washers (3x) Thread the high pressure hose out of the appli-ance.In order to prevent fuel from leaking while removingthe fuel tank, the supply and return lines must be con-nected. Tilt the appliance back and rest it. Pull out the spring clip on the fuel return hose onthe fuel pump. Pull out the spring clip on the fuel supply hose be-hind the fuel filter.1 Fuel hose, return2 Fuel hose, supply3 Fuel filter4 Fuel pump5 Fuel tank Pull out the fuel supply hose behind the fuel filter. Pull the fuel return hose out of the fuel pump andattach it to the fuel filter.1 Fuel hose, return2 Fuel hose, supply3 Fuel filter4 Fuel pump5 Fuel tank Disconnect the fuel line at the tank.5.9 Remove the top part with the on-demand heater5.9.1 Remove high pressure hose (UX versiononly)5.9.2 Close the fuel lines