Kärcher CV 66/2 Service Manual

Also see for CV 66/2: Instruction manual Manual Original instructions Instructions Original instructions

Contents

Kärcher CV 66/2 Service Manual Manual pdf 7 page image

English 7To change a broken height adjustment lever, you must proceedas described above.Î Turn the lever by 90° and pull it out to remove the lever fromthe plastic coverÎ Replace the splint after removing itÎ Assemble the handle and the adjustment in reverse order ofremovalSeveral disassembly steps are necessary to remove the appli-ance hood, which are described in more detail in other chapters.These points are not specifically marked in the text.Î Remove operating panelÎ Removing the handleÎ Remove the wheel cover. For this, lift the cover using ascrewdriver and carefully release it.Î If the locking nose should break off, the cover must be re-placed.Î Unscrew the screw from the wheel shaftÎ Removing the wheelÎ Remove the fastening angles on both sidesÎ Tilt the appliance rearwardÎ Remove the brush motor - loosen all 4 screwsÎ Remove the brush motor and pull of the drive belt5.7 Removing the appliance hood