K-array Redline KR200S User Manual

Also see for Redline KR200S: User manual

Contents

K-array Redline KR200S User Manual Manual pdf 7 page image

HP Sound Equipment s.r.l. - www.k-array.comViale Roma 7/i 50037 San Piero a Sieve (Firenze) Italy - tel +39 055 8487222 fax e-mail: info@k-array.com+39 055 84872387. TECHNICAL DATAENGLISHpag. 07USER 'S MANUALhorizontal500 Hz250 Hz8 KHz4 KHz1 KHz500 Hz250 Hz8 KHz4 KHz1 KHzverticalKR200SAcousticsSpeakers power handling 800(sub) + 500(sat) w (EAS)Max power 1200(sub) + 1200(sat) w 1Impedance 8Ω(sub)+16Ω(sat)Frequency range 30Hz - 19 KHz +/- 3dB (preset dependent)SPL 1W/1mt 97 dB (sub) 101 dB (sat) 2Maximum SPL 127dB continuous - 133 dB peakCoverageHorizontal 100°Vertical 7°CrossoverType DSP controlledFrequency 150 Hz minimum (preset dependent)TransducersLow frequency 1 x 18” Neodymium speakers with 3” voice coilHigh frequency 32 x 2” Neodymium speakers with 0,75” voice coilAudio InputConnectors male + female parallel 3-pin balanced XLRWiring Pin1 = ground - Pin2 = hot - Pin3 = coldAudio powered OutputConnector Female SpeakonWiring Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C.Remote control InputConnectors 1 x female 8 poles RJ45Power InputConnectors 2 x PowerCon IN/OUTType 1 modules class D - DSP controlledSubwoofer power 1000 Watt 3 @8ΩSatellite power output 1000 Watt 3 @8ΩProtection Dynamic limiter, over current, over temp, short circuitsAC powerOperating range 210 - 240 Vac 50Hz (Default)100 - 120 Vac 60Hz (Selectable)I. nom 5.5 A / 115 Vac - 2.9 A / 230 VacMinimum operation voltage 95 Vac - 195 VacMaximum operation voltage 125 Vac - 205 VacMax continuos andburst currentDefault 6A(>10 sec) - 12A (<1 sec)Selectable 10A(>10 sec) - 20A (<1sec)PhysicalDimensions KL18ma: 46.5 x 47.5 x 61 cm (18.31”x 18.70” x 24.02”)KR200: 5.7 x 222.5 x 7.4 cm (2.24”x 87.60” x 2.91”)Weight KL18ma: 25.8 Kg (56.88 lbs) KR200: 8.2 Kg (18.08 lbs)90°120° 60°30°-30°-60°150°-90°180°-150°-120°0° frontback90°120° 60°30°-30°-60°150°-90°180°-150°-120°0° frontbackDISPERSION GRAPHSNotes for data1. Maximum RMS applicable power for a musical signal, thereference signal is the one proposed by EIAJ standard.2. Measured @4 mt then scaled @1 mtnominal load impedance.New materials and design are introduced into existing productswithout previous notice. Present systems may differ in somerespects from those presented in this brochure.

/ 10

Related manuals for K-array Redline KR200S