JVC XV-NA70BK Instructions Manual

Contents

Advanced operations23AdvancedoperationsTo dismiss the VFP mode selection windowPress VFP - PROGRESSIVE SCAN.NOTES• The window for VFP mode selection and parameter settingdisappear if no operation is made for about 10 seconds.• Simply press the VFP - PROGRESSIVE SCAN button, and donot hold it down for a few seconds; otherwise the Progressivescanning mode will be changed, if the VIDEO SIGNALSELECTOR on the rear of the unit is set to “REMOTE.”To simulate surround sound (3D PHONIC)Using the 3D PHONIC function, you can get a simulatedsurround effect from your stereo system.1 During playback, press 3D PHONIC.The 3D PHONIC window appears on the TV screen.2 Press 2/3 to select the desired mode.Each time you press the button, the 3D PHONIC modechanges as follows:• ACTIONSuitable for action movies and sports programs in which thesound source moves.• DRAMANatural and warm sound. You can enjoy movies in a relaxedmood.• THEATERYou can enjoy sound effects like in a theater.3 Press 5/∞ to adjust the effect level.You can set the effect level from [1] to [5].The higher value enhances the effect.To dismiss the 3D PHONIC windowPress 3D PHONIC.NOTES• The 3D PHONIC window disappears if no operation is made forabout 10 seconds.• The 3D PHONIC function works correctly only when playingback a DVD VIDEO disc recorded with Dolby Digital.• When playing back a DVD VIDEO disc recorded with DolbyDigital that does not contain the rear signal, you can change the3D PHONIC setting, but you will not be able to achieve a correct3D effect.• The 3D PHONIC function does not affect the Dolby Digitalbitstream signal from the DIGITAL OUT jack.• When the 3D PHONIC function is active, the [ANALOG OUT]setting in the [AUDIO] setting display is not available.• When one of the 3D PHONIC modes is activated, the [3D]indicator lights up in the display window.Checking the sampling frequency andquantization bit lengthYou can check the sampling frequency and quantization bitlength of digital audio during playback.During playback, press and hold downAUDIO - fs/Rate for a few seconds.The sampling frequency and quantization bit length of thecurrent digital audio are shown in the display windowtemporarily. When the audio is recorded using a surroundaudio format, the sampling frequency and quantization bitlength are shown for the front speakers.(Example)The sampling frequencies indicated are as follows:44.1, 48, 88.2, 96, 176.4, and 192 (kHz). Note that any figurebelow the first decimal place is omitted in the display window.NOTES• With some discs, [NO INFO.] may appear instead of thesampling frequency and quantization bit length.• The sampling frequency and quantization bit length cannot bedisplayed with VR format discs.ACTION DRAMA THEATER NONE+ 5ACTION 4Selected effect modeQuantization bit lengthSampling frequency