JVC VN-T216VPRU Instructions Manual

Also see for VN-T216VPRU: Specifications Specifications Instructions Quick guide Instructions

3CautionConnect only one camera to the power line, AC24V. Do notshare the power line with other equipment. The power cablebetween power source and the camera must be under 3 m.Caution When powering the camera from AC24V, a UPS sourceshould be considered to ensure satisfactory performance.FCC Compliance StatementInformation to the user: This equipment has been tested and found tocomply with the limits for a Class A digital device, Pursuant to Part 15 of theFCC Rules; these limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference toradio communications. However, there is no guarantee that interference willnot occur in a particular installation.If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference. For example, tryreorienting or relocating the receiving antenna, increasing the separationbetween the equipment and receiver, or connecting the equipment to an outleton a different circuit.CautionChanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate the equipment.This Class A digital apparatus complies with Canadian ICES-003.Manufacturer’s Declaration of ConformanceEuropeThe manufacturer declares that the equipment supplied with thisINSTRUCTIONS is compliant with the essential protection requirements ofEMC directive 2004/108/EC and General Product Safety Directive GPSD2001/95/EC, conforming to requirements of standards EN 55022 foremissions, EN 55024 for immunity.