JVC UX-L30R Instructions Manual

Also see for SP-UXL30: Instructions Bruksanvisning Service manual Instructions

– 14 –Switching to a Program Type of Your ChoiceTemporarilyThe Enhanced Other Networks function allows the unit toswitch temporarily to a broadcast program of your choice(TA, News and Info) from a different station.• The function only works when you are listening to a presetFM RDS stations providing the data.To activate the Enhanced Other Networks functionREMEMBER you must preset FM RDS stations to use thefunction. If not yet done, see pages 11 and 12.• There is a time limit in doing the following steps. If thesetting is canceled before you finish, start from step 1again.On the remote control ONLY:1 Press TA/News/Info until the datatype you want appears on thedisplay.The selected data type indicator also flashes.• Each time you press the button, the data type indicatorschange as follows:TA: Traffic announcementNews: NewsInfo: Program the purpose of which is to impartadvice in the widest sense.OFF: The function is canceled. The data typeindicator (TA, News and Info) goes off.2 Wait for about 3 seconds after specifying thedata type.The data type indicator stops flashing and remains lit.Now, the function is activated. See “How the EnhancedOther Networks function actually works.”How the Enhanced Other Networks functionactually works:CASE 1If there is no station broadcasting the program youhave selectedThe unit continues tuning in to the current station.«When a station starts broadcasting the program youhave selected, the unit automatically switches to thestation. The indicator of received PTY code startsflashing.«When the program is over, the unit goes back to thepreviously tuned station, but the function still remainsactivated.CASE 2If there is a station broadcasting the program youhave selectedThe unit tunes in to the program. The indicator ofreceived PTY code starts flashing.«When the program is over, the unit goes back to thepreviously tuned station, but the function still remainsactivated.CASE 3If the FM station you are listening to isbroadcasting the program you have selectedThe unit continues to receive the station but theindicator of received PTY code starts flashing.«When the program is over, the indicator of receivedPTY code stops flashing and remains lit, but thefunction still remains activated.More about the Enhanced Other Networks function• The data sent from some stations may not be compatible with thisunit and also some station may not include Enhanced OtherNetworks data. In this case, the function may not work correctly.• While listening to a program tuned in by the function, the stationdoes not change even if another network station startsbroadcasting a program of the same data.• The function is canceled when you change the source to CD,TAPE or AUX/MD, while it is temporarily canceled when youchange the source to AM (MW/LW).• This function is also canceled when you turn off the unit.TA/News/InfoTA News InfoOFF(Canceled)