54Network remote control ENCODE PARAMETERSClicking ENCODE PARAMETERS on the left of the Streamcorder screen displays the ENCODE PARAMETERSscreen for performing video/audio compression settings.Click the OK icon toconfirm setting.Screen selectionSettingSelect the setting from thepull-down menu.Setting rangeindicates default factory setting.ItemFrame SizeBit RateFrame RateDescriptionSets the video compression size.320 × 240: Sets the image size to 320 × 240 pixels.160 × 120: Sets the image size to 160 × 120 pixels.* The input image for a 160x120 pixel image is 160x120 pixels. However, they willbe 160x128 pixels when compressed.Sets the video streaming speed.Sets the frame rate per second. The maximum tranmitted frames per second varies de-pending on the FRAME SIZE and BIT RATE settings as shown below:\ NTSC signal\ PAL signal* The frame rates shown in the table are not guaranteed values.Setting 320 × 240160 × 12056K (bps)128K (bps)256K (bps) 384K (bps)512K (bps)MAX MIDMINFRAME SIZEBIT RATE 320 × 240 160 × 120MAX MID MIN MAX MID MIN512K 15 10 7.5 30 15 10384K 15 10 7.5 30 15 10256K 15 7.5 5 30 15 7.5128K 7.5 5 3 15 10 7.556K 3 1 1 10 7.5 5FRAME SIZEBIT RATE 320 × 240 160 × 120MAX MID MIN MAX MID MIN512K 12.5 5 5 25 12.5 12.5384K 12.5 5 5 25 12.5 5256K 12.5 5 5 25 12.5 5128K 5 5 1 12.5 12.5 556K 1 1 1 12.5 5 5→ OVER
