5Other than the use of a LAN card, this unit is also equipped with a LAN terminal for LAN connection.Basic Using LAN terminalLAN cable types● When connecting directly to a PC, use a 10/100 BASE-T cross cable.● When connecting to a network hub, use a 10/100 BASE-T straight cable.Connecting to the LAN terminalCompletely insert the connector of the LAN cable.Caution● Do not remove the LAN cable when the Link LED is on. For a short time, menus cannot be opened.● Do not connect/disconnect the LAN cable when recording to a CF memory card.● Do not mount a LAN card when the Link LED is on.Link LEDThe Link LED will light when connected to a network using the LAN terminal.When mounted with a LAN card, the Link LED will not light.When using both LAN card and LAN terminalWhen mounted with a LAN card, the LAN card will be given priority for LAN connection. In this case, communication via the LANterminal is not possible.MemoWhen mounted with a CF memory card, the following can be performed:● Transferring of a clip recorded on a CF memory card to a server via the LAN terminal.VIDEOLINEINOUTMONITOROUTDC12VDVIN/OUTIN OUT OFFAUDIOREMOTE2INB-YR-YSYNC IN TIME CODEIN OUTYCOMPONENTOUT CH 1/3 CH 2/4INOUTMONITOROUT REMOTE1TIMERREC PLAYSERIALREMOTESIGNALGNDY/CLANLink LEDLAN terminalLAN cable
