JVC MX-KC45 Instructions Manual

Also see for CA-MXKC45: Service manual Instructions

Contents

15Using the CD PlayerEnglishTo Exit and Re-enter Program PlayThe program you have made is stored in memory. So, you can exitProgram Play temporarily or re-enter Program Play unless you de-lete the program.To exit the program mode once, press the 7 button to stopplaying. The “PRGM” indicator goes off and the Program modewill be canceled. The program is stored in the memory.To re-enter Program Play mode, press the PROGRAM but-ton until the “PRGM” indicator lights up again.• Tray will not open during the program playback.Random PlayThe tracks of the selected CD will play in no special order whenyou use this mode.1 In Stop mode, set the CD Player in RandomPlay mode.Press the RANDOM button to light the “RNDM” and “1 DISC”indicator.At the same time, “RANDOM” appears on the display.Each time you press the button, the display changes as follows:RANDOM = Normal display (Normal Play) = (back to the be-ginning)2 Press the CD 6 button.The tracks on selected CD are played in random order.To stop playing, press the 7 button. The Random mode is can-celed and the “RNDM” and “1 DISC” indicator goes off.To skip a track during playback, press the ¢ button tojump to the next track in the random sequence.• To use Repeat Play for Random Play, press the RANDOM but-ton to display “REPEAT” and “1DISC” before starting play-back. For details, see “Repeating Tracks” mentioned below.Repeating TracksYou can repeat all tracks or individual track, as many times as youlike.Press the REPEAT button.The Repeat indicator changes with each press of the button, as fol-lows:REPEAT 1= REPEAT 1DISC= REPEAT ALL = Normal dis-play(Normal Play) = (back to the beginning)In Program Play mode, the Repeat indicator changes with eachpress of the REPEAT button, as follows:REPEATï Blank displayIt repeats all the tracks in the program.To stop playing, press the 7 button. Changing the source to theother (e.g. Tuner) will also stop playing. The Repeat mode is can-celed and the Repeat indicator goes off.Tray Lock FunctionIn order to safely keep the CD in the CD Player, the tray can beelectronically locked.When the electronic lock is on, the tray cannot be opened even ifthe CD Open/Close 0 button on the Unit is pressed.Locking the Tray1 Turn on the System and enter CD mode.2 While pressing down the 7 button, press theCD Open/Close 0 button on the Unit.“LOCKED” appears on the display.• If you try to open the tray by pressing the CD Open/Close 0button, “LOCKED” appears on the display to let you know thatthe tray has been locked.Unlocking the TrayRepeat above steps 1 and 2.“UNLOCKED” appears on the display.Now, you can use the tray normally.• Even after the System is unplugged, the tray lock condi-tion will be retained for a few days. To unlock the tray afterpowering up, you need to perform the unlocking opera-tion.REPEAT 1: Repeats one track.REPEAT 1DISC:Repeats all tracks on one CD. (Selectable inNormal Play and Random Play)REPEAT ALL: In Normal Play mode, repeats all the tracks onall the CDs.