JVC MX-G50 Instructions Manual

Also see for MX-G50: Service manual Instructions for use

– 6 –Getting StartedUnpackingAfter unpacking, check to be sure that you have all thefollowing items.The number in the parentheses indicates the quantity of thepieces supplied.• AM loop antenna (1)• FM antenna (1)• Remote control (1)• Batteries (2)If any is missing, consult your dealer immediately.Putting the Batteries into the Remote ControlInsert the batteries — UM-4/AAA/IEC R03 — into theremote control, by matching the polarity (+ and –) on thebatteries with the + and – markings on the batterycompartment.When the remote control can no longer operate the unit,replace both batteries at the same time.13• DO NOT use an old battery together with a new one.• DO NOT use different types of batteries together.• DO NOT expose batteries to heat or flame.• DO NOT leave the batteries in the batterycompartment when you are not going to use theremote control for an extended period of time.Otherwise, it will be damaged from battery leakage.UM-4/AAA/IEC R03Continued2Connecting AntennasFM antenna1 Attach the FM antenna to the FM [75 Ω]coaxial terminal.2 Extend the FM antenna.3 Fasten it up in the position which gives youthe best reception, then fix it on the wall, etc.About the supplied FM antennaThe FM antenna supplied with this unit can be used as temporarymeasure. If reception is poor, you can connect an outdoor FMantenna.To connect an outdoor FM antennaBefore connecting it, disconnect the supplied FM antenna.FM antenna (supplied)Outdoor FM antenna(not supplied)A 75 Ω antenna with coaxial type connector should beused.-+-+FM [75 ]ANTENNAAMFM [75 ]ANTENNAAM