JVC LT-40X776 User Manual

Contents

52Initial SetupThe DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picturesignal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480ppicture signal is being displayed on the screen. There are two types of 480p picture signals:640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjustedby selecting either SIZE1 or SIZE2.Press the MENU buttonπ† To DIGITAL-IN√® To enterπ† To select AUTO, SIZE1 or SIZE2Press the MENU button to finishNotes:• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to theDigital-In terminal and the picture is being displayed on the screen.• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, thetelevison will select "SIZE1" or "SIZE2" automatically.Digital-InINITIAL SETUPSELECT OPERATE EXITMENUNEXT PAGEPREVIOUS(1/5)VIDEO-1MONITOR OUTDIGITAL-INDIGITAL-IN AUDIOOFFSIZE1DIGITALThis feature is used if you have a DTV or HDMIcompatible component connected to your TV.Press the MENU buttonπ† To DIGITAL-IN AUDIO√® To select “ANALOG”, “DIGITAL” or "AUTO"Press the Menu button when finishedNotes:• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. Ifyour DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.• Refer to your DTV or HDMI component’s instruction manual for more information.• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page71.• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,depending on the audio input from the HDMI.Digital-In AudioINITIAL SETUPSELECT OPERATE EXITMENUNEXT PAGEPREVIOUS(1/5)VIDEO-1MONITOR OUTDIGITAL-INDIGITAL-IN AUDIOOFFSIZE1DIGITAL