23Quick Setup ConnectionsConnecting to an amplifier using your optical outputYou can connect an amplifier that has an optical digital input terminal by using an optical digitalcable from the optical output. The signal that is output can be PCM or Dolby Digital.i.LINK IN/OUTS400(TS)OPTICAL OUTDigital AudioTelevision Rear PanelAmplifier1) Connect the optical cable from underneath the television to the back of the amplifier.Notes:• This terminal can only output digital audio.• In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound inthe Digital Setup Menu. See page 71.• Refer to your owners manual on using your amplifier.
