2Preparation91. Ensure the TV is switched off and notconnected to the mains power supply.2. Lay the TV down on a flat surfaceideally on the edge of a table so thebase of the TV slightly overhangs theedge of the table, with the back sidefacing up. Please make sure a softcushioned material (such as a dry bathtowel or thick piece of foam) is placedbeneath the screen.Slide underthe lipSCARTSPDIFCoax.OUTVGAANT.HDMI 1 (ARC)HDMI 2HDMI 3LANTableFitting the Stand to the TVSCARTSPDIFCoax.OUTVGAANT.HDMI 1(ARC)HDMI 2LAN3. Slide the stand under the lip, the neckwill fit snugly over the screw holes.Then screw the stand to the TV usingthe 4 screws supplied.CushionedmaterialInstalling / Removing the Base StandThe LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure thatno hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exertpressure on the front of the TV at any time because the screen could crack.TV Stand (supplied)LT-32C655_IB.indd 9 17/04/2015 17:35