JVC HR-XV38SAG Instructions Manual

Also see for HR-XV38SAG: Service manual Service manual

Contents

EN 9INSTALLING YOUR NEW UNITBasic Connections It’s essential that your unit be properly connected.A Check the contents.Make sure the package contains all of the accessorieslisted in “SPECIFICATIONS” on page 70.B Situate the unit.Place the unit on a stable, horizontal surface.C Connect the unit to TV.The connection method you use depends on the type ofTV you have.RF Connection8 To connect to a TV with NO AV input connectors —A Disconnect the TV aerial cable from the TV.B Connect the TV aerial cable to the ANTENNA INconnector on the rear panel of the unit.C Connect the provided RF cable between theANTENNA OUT connector on the rear panel of theunit and the TV’s aerial connector.AV Connection8 To connect to a TV with AV input connectors —If your TV is equipped with a AV input connectors,perform AV connection to improve picture quality duringtape playback.A Connect the aerial, unit and TV as per “RFConnection.”B Connect an optional AV cable between the AUDIO/VIDEO OUT connectors on the rear panel of the unitand the TV’s AV input connectors.D Connect the unit to mains.Plug the end of the mains power cord into a mains outlet.DVDINPUT(L-1)AUDIOVIDEOOUTPUTAUDIOVIDEOOUTPUTDVDAUDIOS VIDEOCOMPONENTVIDEO OUTPBPRYDVD/VCRAUDIO/VIDEO OUTPUTANTENNA INANTENNA OUTTV aerial cableTo aerial terminal(provided)Mains power cordMains outletBack of unitTVTo AV inputconnectorsTHESE STEPS MUST BE COMPLETED BEFORE ANYVIDEO OPERATION CAN BE PERFORMED.After the connection is completed, perform “VideoChannel Set” on page 13.