26PreparationRemoving the pantilterTo use the camera alone ( ➭ page 32), remove thepantilter.1 Loosen the camera fixing screw sufficiently.MIC PLUG INPOWER AV EXTENDDC2 Hold the unit and pantilter, and pull it straight up.When the pantilter is not used, connect the AC adapter,AV cord, and external mic to the camera itself.Connecting the AC adapterConnect the supplied AC adapter to the DC connectorof the pantilter.• Be sure to unlock the pantilter beforeconnecting the AC adapter. ( ➭ page 7)• Remove all tape from the pantilter.MIC POWERPLUG IN AV DCEXTENDDIRECT WLANRESETLAN(OFF)ETHERNETDCAVMICPLUG IN POWER• After connecting the AC adapter, the power turns onand the pantilter moves automatically for positionadjustment. The pantilter moves everytime the unitis turned on.• The power lamp blinks when the position adjustmentfails. Turn off the unit and turn it on again forreadjustment. (The position adjustment may havefailed even if the power lamp is not blinking.)AC adapter (supplied) Conversion cable (supplied)
