9For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/Preparation before UseConnecting the Camera toYour ComputerTo set up the camera, fi rst connect it toyour computer.Required operating environmentBrowser: Internet Explorer 9 or later1 Attach the supplied LAN cable tothe camera.DIRECT WLANRESETLAN(OFF)ETHERNETBATT.DCAVMICPLUG IN POWER2 Connect the camera to yourcomputer via the LAN cable.3 Set the network mode switch to[LAN (OFF)].DIRECT WLANRESETLAN(OFF)ETHERNETDCAVMICPLUG IN POWERDIRECT WLAN LAN(OFF)• If the network mode switch is set to[DIRECT] or [WLAN], the LAN terminalcannot be used.• While the power is on, switching thenetwork mode switch does not changethe setting.Connecting the AC AdapterConnect the supplied AC adapter to theDC connector.DIRECT WLANRESETLAN(OFF)ETHERNETDCAVMICPLUG IN POWER
