JVC GV-LS1 User Manual

Also see for GV-LS1 U: Specification sheet User guide User guide Connection guide User guide

Contents

10 For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/Configuring the Camera SettingsAppropriate for Your NeedsSpecify the video format, etc. appropriatefor your needs. Confi gure the settings ona browser.Logging in as an administrator1 If the power is not turned on, pressand hold the [POWER] button topower on.The record button starts blinking. Waituntil it stops blinking and goes off.2 Set the Network Setting of thecomputer as follows.IP Address: 192.168.1.2 to192.168.1.254 (except 192.168.1.100)(example) 192.168.1.23Subnet mask: 255.255.255.0Make a note of the current networksettings before operation for resettingthe network setting.3 Start Internet Explorer, and enter"http://192.168.1.100:8000" in theaddress bar.4 Enter the user name and passwordof the administrator.Initial setting: USERNAME "root",PASSWORD "password".If login is successful, the setup screenappears.Changing the settingsSelect "NETWORK", "CAMERA", or"MANAGE" in the left window of thescreen to change the settings. Click "+"on the left of each item to show the subcategories.● "NETWORK"• "WIRED NETWORK"For establishing a wired connection.• "WIRELESS NETWORK"For connecting wirelessly.• "MONITORING SETTINGS"For connecting via a network.• "STREAM SETTINGS"Format for transmitting/recording.● "CAMERA"• "CAMERA SETTINGS"Camera settings.● "MANAGE"• "COMMON SETTINGS"Change the password of theadministrator, set the clock, etc.• "MEDIA MANAGEMENT"Format the SD card.• "TURN OFF CAMERA"Turn off the power of the camera.* The power cannot be turned on viathe browser.For details, refer to the "Detailed UserGuide".