JVC GR-DVL500 Instructions Manual

Also see for GR-DVL300: Instructions Instructions Instructions Instructions Instructions

EN9132To DC Inputconnector To DC OUTconnectorTo AC outletAC PowerAdapter/ChargerDC cordATTENTION:Before detaching the power source,make sure that the camcorder’s poweris turned off. Failure to do so can resultin a camcorder malfunction.USING THE BATTERY PACK1 Tilt the viewfinder upward 1.2 With the arrow on the battery pack pointingdownward, push the battery pack slightly against thebattery pack mount 2, then slide down the batterypack to attach it 3.•If the battery pack is attached with its mark setin the wrong direction, a malfunction may occur.To Detach The Battery Pack. . ..... tilt the viewfinder upward 1 and slide the batterypack up slightly while pressing BATTERY RELEASE todetach it.Power cordApproximate recording timeBATTERY RELEASEButtonNOTES:●Recording time is reduced significantly under thefollowing conditions:•Zoom or Record-Standby mode is engaged repeatedly.•The LCD monitor is used repeatedly.●Before extended use, it is recommended that youprepare enough battery packs to cover 3 times theplanned shooting time.USING AC POWERUse the AC Power Adapter/Charger (connect as shown in the illustration).NOTES:●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to240 V.●For other notes, pg. 8.INFORMATION:VU-V856KIT is a set composed of theBN-V856U battery pack and AA-V80U ACPower Adapter/Charger. Read the VU-V856KIT’sinstruction manuals before using.It is impossible to charge the BN-V856U batterypack using the provided AC Power Adapter/Charger. Use the optional AA-V80U AC PowerAdapter/Charger.Battery packBN-V408UBN-V416U(optional)BN-V428U(optional)BN-V856U(optional)LCD monitor on/Viewfinder off1 hr.(35 min.)2 hrs.(1hr. 10 min.)3 hrs. 30 min.(2 hrs.)7 hrs.(4 hrs.)LCD monitor off/Viewfinder on1 hr. 15 min.(40 min.)2 hrs. 30 min.(1 hr. 20 min.)4 hrs. 20 min.(2 hrs. 20 min.)8 hrs. 40 min.(4 hrs. 40 min.)( ) : when the video light is on.