JVC Everio GZ-MC500AA Instructions Manual

Also see for Everio GZ-MC500AA: Instructions

Contents

46 EN MANAGING FILESThis camera is compatible with DPOF (DigitalPrint Order Format). You can set which imagesto be printed and the number of prints with thiscamera. This feature is useful to print with aDPOF-compatible printer or bring a recordingmedium to photo lab for print.To print by selecting a still image1 Set the power switch to .2 Press MODE to select .3 Press MENU. The menu screen appears.4 Select [DPOF] with the multi-controller (r/t), then press 49. The DPOF menu screenappears.5 Select [SELECT IMAGES] with the multi-controller (r/t), then press 4 9.6 Select the desired filewith the multi-controller(r/t/w/e), then press49.● The scroll bar can alsobe used with the zoomlever and the multi-controller (r/t). ( pg. 28)● If you slide and hold the zoom lever towards T, thepreview screen of the still image is displayed.7 Select the number ofprints (max. 15 prints)with the multi-controller(w/e), then press 49.● To set print informationfor other images, repeatsteps 6 and 7.8 Press MENU to finishthe setting.● To cancel the selection, select the same image instep 6.NOTE:The DPOF setting is available up to 999 images.To print all still images (One print for each)1 Display the DPOF menu screen. ( “To printby selecting a still image”)2 Select [ALL 1] with the multi-controller (r/t),then press 4 9.3 Select [EXECUTE] with the multi-controller(r/t), then press 49.4 Press MENU to finish the setting.To confirm the DPOF setting1 Display the DPOF menu screen. ( “To printby selecting a still image”)2 Select [CHECK SETTINGS] with the multi-controller (r/t), then press 4 9.3 If necessary, change the number of prints forthe desired file by following the steps 6 to 7 in“To print by selecting a still image”.4 Press MENU to return to the previous menu.To reset the DPOF setting1 Display the DPOF menu screen. ( “To printby selecting a still image”)2 Select [RESET] with the multi-controller (r/t), then press 4 9.3 Select [EXECUTE] with the multi-controller(r/t), then press 49.4 Press 49 to finish the reset.DPOF Print SettingDPOF TOTAL: 125 7/591500010002 00050000DPOF TOTAL: 125 7/591500010002 00050000Number of prints