JVC EM39T User Manual

Also see for EM32TS: Quick start guide User manual

18Set Aspect Ratio1 Press WIDE to display the Wide menu.2 Press WIDE repeatedly or press or toscroll through the options, then press OK.To Select Digital ChannelsPress the first 3 digits, then press _ , followed bythe remaining number. Example, to select channel15-1, press 1, 5, _ , 1, then press ENT.To Select by Channel ListAll channels found from channel scan are listed onthe Channel List screen. You can select channelsfrom this screen.1 Press ENT to display the Channel List screen.2 Press or to select a channel number,then press ENT.3 Press RETURN to close the Channel Listscreen.Mute VolumePress MUTE to turn the sound off. To turn thesound back on, press MUTE again or any of theVOL buttons.Set Sleep TimerSleep timer sets the TV to automatically turn offafter a preset amount of time. After setting a presetamount of time, the TV will automatically turn offafter the timer has expired.1 Press SLEEP to display the Sleep screen.2 Press SLEEP repeatedly or press or toscroll through the options, then press OK.To cancel sleep, set the timer to Off.Display InfoPress INFO to display the channel or inputinformation on the screen.Press INFO again to hide the Info screen.Basic OperationsNormalWhen watching a 4:3 content,the TV displays a standardpicture with black side bars.When viewing a 16:9 content,it displays a full picture.WideWhen displaying a 4:3content, the picture isstretched horizontally to fillthe width of the screen. Whenwatching a 16:9 content, theimage is slightly overscan.ZoomThe entire picture is uniformlyenlarged to retain its originalproportion. However, someparts of the picture may behidden.PanoramicThe picture is stretchedhorizontally on the left andright sides to fill the width ofthe screen. The center of thepicture is not stretched.StretchThe picture is stretchedhorizontally on the left andright sides.Note:• Panoramic mode is only available on 4:3 contents.• Stretch is only available on 16:9 contents.