JVC DR-MV1 Instructions Manual

Also see for DR-MV1S: Instructions Instructions Bedienungsanleitung

Contents

EN 69EDITINGYou can dub selected audio from a DVD or Audio CD disc to adigital audio device.However, it is not possible to dub copy-protected discs.Example: Dubbing to an MD1 Connect the unit and a digital audio device using either anoptional optical cable or an optional coaxial cable.2 Place a disc on the unit and load an MD on the connected digitalaudio device.3 Select the audio to be dubbed.4 Start playback slightly before the actual point from where youwish to start dubbing.5 Press 9 to pause playback.6 Select the input mode on the connected digital audio device.7 Press 4 to start playback on the unit.8 Start recording on the digital audio device.9 Stop recording on the digital audio device. Then press 8 to stopplayback on the unit.NOTE:There may be a discrepancy of several seconds between where youintend editing to start, and where it actually starts.Digital Audio Dubbing● Turn on the TV and select the video channel (or AV mode).● Slide the TV/CABLE/DBS/DVD switch to DVD.1Rear of unitNote for connection:Remove the protectioncap from the cable.Digital audio device(MD deck, etc.)Coaxial cable(not supplied)DIGITAL AUDIO OUT(COAXIAL)PlayerRecorderOptical cable(not supplied)DIGITAL AUDIO OUT(OPTICAL)