JVC DR-DX5SE Instructions Manual

Also see for DR-DX5SE: Instructions Bedienungsanleitung

Contents

EN 33BASIC OPERATIONS ON DVD DECKInstant Timer Recording (ITR)This easy method lets you record for 30 minutes to 6 hours(selectable in 30-minute intervals), and shuts the unit off afterrecording is finished.1 Press R on the unit to start recording.2 Press R again to engage the ITR mode.● On the front display panel, A0:30B appears.3 If you want to record for more than 30 minutes, press R toextend the time. Each press extends recording time by 30minutes.NOTES:● You can only perform ITR using the R button on the unit.● ITR is not possible during timer recording.● When the recording capacity becomes full during timer recordingor Instant Timer Recording, the unit automatically performsARelief RecordingB (A pg. 46).Watch Another Programme While Recording On TheUnitWhile recording is going on, you can watch another programme onthe TV by using the TV’s tuner.NOTE:It is required that the remote control is set to be able to operate theTV in advance. (A pg. 67)1 During recording, press TV AV/VIDEO to select TV mode.● Video mode is disengaged, and the VIDEO indicator on thefront display panel lights off.● The programme received on the TV’s tuner is displayed on theTV screen.2 Slide the TV/CABLE/SAT/DVD switch to TV.3 Press PR +/– repeatedly to select the desired channel.NOTE:If a decoder is connected to the unit (A pg. 70), you can select ascrambled channel as well as other normal channels.Elapsed Recording Time And Disc Remaining TimeIndicationDuring recording, press DISPLAY repeatedly until the desiredindication appears on the front display panel.● Each time you press DISPLAY, the time indication changes asfollows:Elapsed recording time N Disc remaining time N Clock N (Backto the beginning)● You can also check the disc remaining time by pressing REMAINwhile the unit is stopped or recording is in progress. The list ofdisc remaining times for all recording modes appears on the TVscreen.Recording Features● Turn on the unit.● Turn on the TV and select the AV mode.● Slide the TV/CABLE/SAT/DVD switch to DVD.● Press DV/HDD/DVD SELECT on the unit repeatedly or DVDon the remote so that the DVD lamp lights up on the unit.RDV/HDD/DVDSELECTTV AV / VIDEOREMAINDVDDISPLAYPR+/-CABLE/SATDVDTVDVD lampVIDEO indicator lights off.