62 ENDISPLAY AND MESSAGESNO IMAGES STOREDCONTAINS PROTECTED IMAGESTRANSMISSION IN PROGRESSRECEPTION IN PROGRESSTOO MANY COPIESIMAGE COPYING IN PROGRESSFORMATTING IN PROGRESSTRANSMISSION TO BE STOPPEDRECEPTION TO BE STOPPEDTRANSMISSION FAILEDRECEPTION FAILEDPC MODEDELETING IN PROGRESSPLEASE INITIALIZEDisplay Description● Appears during playback when no images are stored in thebuilt-in memory or Compact Flash card.● Appears when there are protected images in the camera whenall-image deletion is attempted. In this case, all images can bedeleted by unprotecting the protected images.● Appears while the camera is transmitting image data via the IRcommunication system.● Appears while the camera is receiving image data via the IRcommunication system.● Appears when copying is impossible because there is notenough space at the destination. Either make space at thedestination or reduce the number of images to be copied.● Appears while image data is being copied.● Appears while a Compact Flash card or the built-in memory isbeing initialized.● Appears when image transmission is cancelled.● Appears when image reception is cancelled.● Appears when data was not sent due to failure.● Appears when data was not received due to failure.● Appears during image transmission through a PC connection.● Appears while the camera is deleting images.● Appears when a malfunction occurs in the built-in memory.When this appears, initialize the built-in memory.