JVC CompactFlash LYT0143-001A Instructions Manual

Contents

EN 29PLAYOFFCAMERA MENUCAMERAP I CTURE MODESYSTEMEX I TSYSTEMPOWER SAVEF LASH ADJ .EX I TDATE / T I MEF LASH ADJ .+ 2EX I TFlash AdjustmentIf an image shot with the flash is too dark or too bright, adjust the flash intensity as described below.1 Turn the Power Dial, while pressing its LockButton, to “M ” or “ ” and push the MENUJog Dial.•The CAMERA MENU Screen appears.2 Rotate the MENU Jog Dial to select “SYSTEM”and push it.•The SYSTEM Setup Screen appears.3 Rotate the MENU Jog Dial to select “FLASHADJ.” and push it.•The FLASH ADJ. (Adjustment) Screenappears.Lock ButtonPower DialMENU Jog DialSYSTEM Setup Screen FLASH ADJ. (Adjustment) ScreenCAMERA MENU ScreenLCD monitor4 Rotate the MENU Jog Dial to select the flashintensity and push it.•Select from “0”, “–1”, “–2”, “+1” and “+2”.To brighten the flash (+1, +2) . . .Rotate the MENU Jog Dial downward.To darken the flash (–1, –2) . . .Rotate the MENU Jog Dial upward.5 Push the MENU Jog Dial twice.•The flash adjustment value is entered and theshooting screen reappears.NOTES:●Aim the flash at the subject.●Even when the flash intensity is increased, thesubject may not be properly lit, depending on theshooting conditions.