JVC BR-DV3000U - Professional Editing Video Cassete recorder/player Instruction Manual

Also see for BR-DV3000E: Quick guide Instruction manual Instructions

Contents

68OTHERS – Troubleshooting –Symptom ActionThe power does not come on.The cassette cannot be loaded.Unable to record.The operation buttons of the mainunit do not work.The 9 PIN REMOTE or SERIAL RE-MOTE cannot be engaged with theREMOTE SEL switch.Noise appears on the playbackscreen.Playback audio is disrupted.During DV signal input, the timecodes are not recorded correctly.After holding down the EJECTbutton of the main unit for 2 sec-onds or longer, the menu screendoes not appear.Video and sound are distorted fora few seconds after starting play-back.The wireless remote controllerdoes not work at all.Power is not supplied even whenthe OPERATE button is pressed.Is the AC adapter correctly connected?Is the cassette indicator lit? If so, a cassette is already loaded.Please unload the cassette first.Push the center of the cassette and make sure that the cassetteenters levelly.Is the slide of the cassette set to "REC"?Please set it to "REC" if it is at the "SAVE" position.Is the OPERATION LOCK item of the SYSTEM (2/2) menu setto “ON”? Please set it to “OFF” so that the operation buttons ofthe main unit can to be used.During REMOTE mode, please use the LOCAL function menuitem to select the buttons to be rendered operable.Is the REMOTE item of the REMOTE (1/2) menu set to “OFF”?To use the 9 PIN REMOTE or the SERIAL REMOTE, please setit to “ON”.When the OPERATE LOCK item of the SYSTEM(2/2) menu isset to “ON”, the REMOTE SEL. switch will not function.• Is the tape damaged?Please replace the cassette.• Is the head dirty?Please clean it with the dedicated head-cleaning tape.(☞ Page 8)Is the TC DUPLICATE item of the TIME CODE menu set cor-rectly?Is a cassette loaded? Before attempting to display the menuscreen with the EJECT button, please remove the cassette.This occurs if the signal system of the playback tape is differentfrom the NTSC/PAL setting.• Is the REMOTE SEL switch on the main unit set to “WIRE-LESS”?• Are the batteries exhausted?Is the REMOTE SEL switch set at either “SERIAL” or “9 PIN”when the LOCAL FUNCTION item of the REMOTE menu is setto something other than ALL KEYS? Please set the REMOTESEL. switch to “WIRELESS”.