JVC BR-DV3000U - Professional Editing Video Cassete recorder/player Instruction Manual

Also see for BR-DV3000E: Quick guide Instruction manual Instructions

Contents

19ON-SCREEN DISPLAY – Status display – Status display: It displays the current settings and operating status.3 2 K C H – 1 / 2 S P 0 0 0 m i n1 0 / 1 0 / 0 2 S T A N D B Y - O F F1 2 : 0 0 : 0 0 T C R 0 2 : 0 0 : 0 0 : 0 012No. Item Content1 Sampling frequency/audiooutput CH• Sampling frequencyDuring recording, the setting value of the AUDIO MODE itemof the AUDIO/VIDEO menu is displayed (32K or 48K).During playback, the sampling frequency of the sound re-corded on the tape is displayed (32K, 48K, 44.1K).During DV signal input, the sampling frequency of the soundinput is displayed.• A.LOCKLights up when the video and audio sampling clocks (at48kHz) are synchronized in the PLAY mode.Lights up in the RECORDING mode and EE mode.Does not light up when the sampling rate is 32kHz or 44.1kHz.• Audio output channelDuring recording, the audio channel recorded on the tape isdisplayed.During playback, the audio channel output from the AUDIOOUT terminal is displayed (CH1/2, CH3/4, MIX). (only in 32Kmode)• The AUDIO INFO. item of the DISPLAY menu can be set toactivate/deactivate the display.MemoIf the time code display po-sition is set to the upper left,this item will be displayed onthe lower right.2 Date/time • It displays the date (MM/DD/YY) and time (HR:MM:SS).• When the unit is in the RECORDING or STOP mode, it dis-plays the data of the built-in clock.• During playback, fast forward or rewind, the data recordedon the tape is displayed.• During DV signal recording, the data from the DV terminal isdisplayed. If the REC button is pressed in the STOP mode,the input data from the DV terminal will be displayed.• The style for displaying the date and time can be selectedfrom the DATE STYLE and TIME STYLE items of the DIS-PLAY menu.• The TIME/DATE setting of the DISPLAY menu can be set toturn on/off the date and time display or to select the style.• When the data/time is not set, “– –” will be displayed.If a tape with no date and time data is played, "– –" will bedisplayed.MemoIf the display position of thetime code is set to the lowerleft, this item will be dis-played on the lower right.