JVC 1105RYMMDWJEIN Instructions Manual

Contents

50On the front panel:Before you start, remember...There is a time limit in doing the following steps. If the setting iscanceled before you finish, start from step2 again.1 Select and play any source.• Surround/DSP modes are not available when selecting “AMULTI” in the audio input setting (see page 20) or whenmulti channel PCM (see page 47) signals recorded in DVD-Audio are coming in.• Make sure you have selected the input mode (analogue ordigital) correctly.2 Press SURROUND.MULTI JOG now works for selecting Surround/DSP modes.3 Turn MULTI JOG to select the Surround/DSPmode you want.Ex.: When “DOLBY DIGITAL” is selected for Dolby Digitalmulti-channel software:* 1 “AUTO SURROUND” is the initial setting.* 2 Available Surround modes vary depending on the speakersettings and the incoming signals. For details, see page 49.* 3 If an incoming signal is a multi-channel (more than 2channel) digital signal, “MONO FILM” is not available.* 4 If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” isnot available.To cancel Surround/DSP modesTurn MULTI JOG so that “SURROUND OFF” appears on thedisplay.When you select “AUTO SURROUND”You can enjoy the Surround mode easily.• For details about the Surround modes, see page 49.• When “AUTO SURROUND” is activated, the AUTO SURR indicatorlights up on the display.How does “AUTO SURROUND” work?• If a multi-channel signal comes in, an appropriate Surroundmode will be selected automatically.• If a Dolby Digital 2-channel signal with surround signal comesin, “PLIIx MOVIE” or “PLII MOVIE” will be selected.• If a Dolby Digital 2-channel signal without surround signalcomes in, “SURROUND OFF (stereo)” will be selected.• If a Linear PCM signal comes in, “SURROUND OFF (stereo)”will be selected.NOTE“AUTO SURROUND” does not take effect in the following cases:– While playing an analogue source,– While selecting one of the fixed digital decode mode—“DOLBYDIGITAL” or “DTS” (see page 21).Activating the Surround/DSP modesAvailable Surround/DSP modes vary depending on the speakersettings and the incoming signals. For details, see page 49.Activating one of the Surround/DSP modes automaticallyrecalls the memorized settings and adjustments.• To adjust the speaker output level, see page 37.• When activating one of the Surround/DSP modes, youcan adjust CENTER TONE. (See page 39.)• When activating one of the Surround/DSP modes(except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, andALL CH STEREO), you can adjust CNTR ALIGNMENT.(See page 39.)• When activating “NEO:6 MUSIC,” you can adjust CENTERGAIN. (See page 39.)• When activating the DSP mode (except ALL CHSTEREO), you can adjust the following settings:EFFECT (see page 38)LIVENESS (see page 39)ROOM SIZE (see page 38)• When activating “PLIIx MUSIC” and “PLII MUSIC”, youcan adjust the following settings:CENTER WIDTH (see page 39)DIMENSION (see page 39)PANORAMA (see page 39)Selecting the Surround/DSP modesFrom the remote control:1 Select and play any source.• Surround/DSP modes are not available when selecting “AMULTI” in the audio input setting (see page 20) or whenmulti channel PCM (see page 47) signals recorded in DVD-Audio are coming in.• Make sure you have selected the input mode (analogue ordigital) correctly.2 Press SURROUND repeatedly to select theSurround/DSP mode you want.Ex.: When “DOLBY DIGITAL” is selected for Dolby Digitalmulti-channel software:* 1 “AUTO SURROUND” is the initial setting.* 2 Available Surround modes vary depending on the speakersettings and the incoming signals. For details, see page 49.* 3 If an incoming signal is a multi-channel (more than 2channel) digital signal, “MONO FILM” is not available.* 4 If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” isnot available.To cancel Surround/DSP modesPress SURROUND repeatedly so that “SURROUND OFF”appears on the display.1,32LLS RSS.WFR LFEC RDIGITALDIGITAL AUTOSURROUND OFF (Back to the beginning)Surround modes * 2AUTO SURROUND * 1HALL1 HALL2 LIVE CLUB DANCE CLUBPAVILION THEATRE1 THEATRE2MONO FILM * 3 ALL CH STEREO * 4LLS RSS.WFR LFEC RDIGITALDIGITAL AUTOSURROUND OFF (Back to the beginning)Surround modes * 2AUTO SURROUND * 1HALL1 HALL2 LIVE CLUB DANCE CLUBPAVILION THEATRE1 THEATRE2MONO FILM * 3 ALL CH STEREO * 41 2 34 5 67 8 910 0 1012