JVC 0305MWMMDWBET Instructions Manual

Contents

18EnglishSetting the ClockWithout setting the built-in clock, you cannot use the DailyTimer (see page 30) and Sleep Timer (see page 18).• To exit from the clock setting, press CLOCK/TIMER asrequired.• To go back to the previous step, press CANCEL.1 Activate the clock setting mode.• If you have already adjusted the clock before, press thebutton repeatedly until the clock setting mode isselected (see page 30).2 Adjust the hour.3 Adjust the minute.Now the built-in clock starts working.To check the current clock time during play• While playing a DVD or MP3, you cannot check thecurrent clock time (see page 9).Turning Off the PowerAutomaticallyTo turn off the System after playback is over—Auto StandbyWhen Auto Standby is in use, the A.STANDBY indicatorlights on the display. When the disc play stops, theA.STANDBY indicator starts flashing. If no operation isdone for about 3 minutes while the indicator is flashing, theSystem turns off (in standby) automatically.• Auto Standby does not work while you are listening toradio (FM/AM) and the external component (AUX andUSB).To turn off the System after a certain period oftime—Sleep Timer1 Specify the time (in minutes).• SLEEP indicator also lights up on the display.2 Wait until the set time goes off.To check the time remaining until the shut-off time• If you press the button repeatedly, you can change theshut-off time.RemoteONLYClockSource information(at the same time)RemoteONLYOnCanceled(at the same time)10 20 30 6090120Canceled(at the same time)(at the same time)