JVC 0305MWMMDWBET Instructions Manual

Contents

6EnglishTo assemble and connect the AM loop antennaTo assemble the AM loop antennaTo connect the AM loop antenna• If the AM loop antenna wire or speaker cords are coveredwith vinyl, remove the vinyl to expose the tip of theantenna by twisting the vinyl.• Make sure the antenna conductors do not touch any otherterminals, connecting cords and power cord. Also keep theantennas away from metallic parts of the System,connecting cords, and the AC power cord. This could causepoor reception.To connect the speaker cordsConnect the right speaker to the R terminals, and the leftspeaker to the L terminals.When connecting the speaker cords, match the polarity ofthe speaker terminals: gray cord (+) to red (+), and gray cordwith black stripe (–) to black (–).Changing the Scanning ModeThis System supports progressive scanning.If you connect a progressive TV through the COMPONENTjacks, you can enjoy a high quality picture from the built-inDVD player by selecting progressive mode.• DO NOT connect more than one speaker toeach terminal.• DO NOT allow the conductor of the speakercords to be in touch with the metallic parts ofthe System.1 Hold 3 Release2 Insert1 Hold 2 Insert 3 ReleasePROGRE(Progressive)Progressive scanning.For a progressive TV. ThePROGRESSIVE indicator lights.INTER(Interlaced)Interlaced scanning.For a conventional TV.RemoteONLYPROGREINTER(at the same time)