10EnglishHolesProjectionsSpeaker grilleTo remove the speaker grillesThe speaker grilles are removable as illustrated below:To remove the speaker grille, insert your fingers at the topof the speaker grille, then pull towards you. Also pull thebottom towards you.To attach the speaker grille, follow the illustration above.Caution on installationThis unit is compact but high powered, so it has a built-in cooling fan which operates when the internal heatrises due to continuous use and/or high volume level.If you want to place speakers or any equipment on thesides of the unit, leave a space of at least 1 cm betweenthe main unit and each other unit to obtain sufficientcooling effect.Connecting a TVConnect your TV and this unit using the composite videocord (supplied) or an S-video cord (not supplied).• DVDs are protected by the copyguard system.Connecting to a TV through a VCR (or to a TV with abuilt-in VCR) may cause distortion of picture.• You can also use JVC’s AV COMPU LINK controlsystem. (See page 65.)To select the color systemThis unit is compatible with the PAL and NTSCsystems. Set the VIDEO OUT SELECT switchon the rear panel while in standby mode tomatch the color system of your TV. Make surethat the color system marked on the package ofa DVD, SVCD, or VCD matches that of yourTV.Before playing back a disc, select the correct“MONITOR TYPE” in the DISPLAY menu accordingto the aspect ratio of your TV. See “To select the monitortype” on page 15.AUX / MDAUDIORIGHT LEFTPCM/STREAMDVD OPTICALDIGITALOUTVIDEOS-VIDEOVIDEO OUTSELECTPAL NTSCVIDEO OUTVideo cord(supplied)S-video cord*(not supplied)TVTo video inputTo S-video inputVIDEO OUTSELECT switch*Using an S-video cordgives you a betterquality pictureVIDEO OUTSELECTPAL NTSC