JVC 0205NYMCREBET Instructions Manual

Contents

3Getting StartedAccessoriesMake sure that you have all of the following items, which are supplied with the System.AM Loop Antenna (1)FM Wire Antenna (1)Remote Control (1)Batteries (2)AC Plug Adaptor (1)If any of these items are missing, contact your dealer immediately.Set the VOLTAGE SELECTOR SwitchTo avoid damaging the System, set the voltage before plugging in the System.Set the correct voltage for you area with the VOLTAGE SELECTOR switch on the back of the Unit. Use a screwdriver to rotate the selector sothe number the voltage mark is pointed at is the same as the voltage.CAUTION:• Make all connections before plugging the System into an AC power outlet.How To Put Batteries In the Remote ControlMatch the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.CAUTION:• Handle batteries properly.❏ To avoid battery leakage or explosion:• Remove batteries when the Remote Control will not be used for a long time.• When you need to replace the batteries, replace both batteries at the same time with new ones.• Do not use an old battery with a new one.• Do not use different types of batteries together.Voltage markR6P(SUM-3)/AA(15F)