JVC 0205NYMCREBET Instructions Manual

Contents

22Using the TimersEnglishPreparation for each music source:Perform the following operation according to the music sourceyou have selected. Then, the System enters Volume Settingmode.When selecting TUNER FM or TUNER AM:Press the ¢ or 4 button to select the preset stationnumber, then press the SET button.When selecting CD :Press the ¢ or 4 button to select the disc number, thenpress the SET button.Each time you press the button the disc number changes as fol-lows:DISC – = DISC 1 = DISC 2 = DISC 3 = (back to the be-ginning)• If no disc number is specified, playback will start from thefirst track of the currently selected disc.When selecting TAPE:Insert a cassette tape you want to play into Deck A.When selecting AUX:Prepare the external equipment so that it will turn on at the ONtime set by the System.To allow this, the equipment should have the timer function.5 Setting the volume level.Press the ¢ or 4 button to select the volume level.VOL – – : When the volume level is under 18: The current vol-ume level will be used.When the volume level is over 19: The volume level is auto-matically set to 18.MIN, 1-31, or MAX: When the timer is turned on, the Volumewill be automatically set to the selected level.6 Press the SET button.The timer setting is completed and the display returns to thedisplay before you set the Timer.7 Press the STANDBY/ON button to turnoff the System, if necessary.The Timer indicator ( ) and “DAILY” indicator are lit on thedisplay, showing that the Daily Timer is set to on.To confirm / change the timer setting, repeat the setting pro-cedure from the beginning.When the timer ON-time comes:The following operation will be automatically repeated every day.• When the timer ON-time comes, the System automaticallyturns on. The music source you have set is played. The Timerindicator ( ) blinks and “DAILY” indicator lights duringtimer operation.• When the timer OFF-time comes, the System automaticallyturns off. Then, the Timer indicator ( ) and “DAILY” indica-tor remain lit on the display.• If the System is already on when the timer ON-timecomes, the Daily Timer does not work.Turning the Daily Timer On and OffOnce you have set the Daily Timer, it is stored in memory. So, theDaily Timer will be activated at the same time every day until it iscanceled.To cancel the Daily Timer temporarily:1 Press the CLOCK/TIMER button on the Unitrepeatedly until the “DAILY” appears on thedisplay.2 Press the CANCEL button on the Unit.“OFF” appears and both the Timer indicator ( ) and the“DAILY” indicator go out.To activate the cancelled Daily Timer:1 Press the CLOCK/TIMER button on the Unitrepeatedly until the “DAILY” appears on thedisplay.The “DAILY” indicator blinks and the Timer indicator ( )lights up on the dispaly.2 Press the SET button on the Unit.“ON” appears on the display. The Timer indicator ( ) andthe “DAILY” indicator remain lit, and the display returns tothe original display.• If the System is unplugged, or a power failure occurs,the timer setting will be lost in a few days. You willneed to reset the clock first, then the timer.Setting the REC (Recording)TimerWith the Recording Timer, you can make a tape of a radio broad-cast automatically whether or not you are home.• You can set the REC Timer whether the System is on oroff.• Perform each setting within approx. 30 seconds. Other-wise, setting will be cleared and the procedure must berepeated from the beginning.• If you have made a mistake while setting the timer, pressthe CANCEL button on the Unit. However, this does not al-ways cancel the current setting. If the CANCEL buttondoes not work, press the CLOCK/TIMER button on theUnit repeatedly until the display returns to the original dis-play, and start from the first step.