JVC 0204STYBICJSC Instructions Manual

5PreparationsConnecting to optional audio equipmentConnecting to a stereo audio amplifier/receiverConnect the player’s AUDIO OUT (LEFT/RIGHT) jacks to anyline-level inputs (such as AUX, DVD, CD, etc.) of an audioamplifier or receiver.Connecting to a digital audio deviceYou can enjoy sound of enhanced quality by connecting theplayer’s DIGITAL OUT (COAXIAL) jack to a digital input of anamplifier, etc., using a or coaxial digital cable. The digital audiosignal on a disc will be transferred directly from the player. If theconnected digital audio equipment is a Dolby Digital or DTSdecoder or an amplifier with a built-in decoder, you can enjoyhigh-quality surround sound.NOTES• It is not recommended to use the digital jacks for dubbing.When recording the sounds (DVD VIDEO, SVCD, Video CD orAudio CD) played back on the player, record them through theanalog jacks.• Depending on the disc, no signal may be output from theDIGITAL OUT. Make an analog connection in this case.• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preferencedisplay correctly according to the connected digital audioequipment. If setting made for [DIGITAL AUDIO OUTPUT] isincorrect, loud noise may be generated causing damage tothe speakers (see page 25).RIGHTLEFTAUDIOINRIGHTLEFTVIDEOCOAXIALDIGITAL OUTVIDEO OUTAUDIO OUTAV OUTRGB/COMPOSITEY/CCOMPOSITEWhiteRedThe playerAudio cable (not supplied)Amplifier or receiverWhiteRedRIGHTLEFTAUDIODIGITALININRIGHTLEFTVIDEOCOAXIALDIGITAL OUTVIDEO OUTAUDIO OUTAV OUTRGB/COMPOSITEY/CCOMPOSITEThe playerAudio cable (not supplied)Digital equipmentCoaxial digital cable (not supplied)WhiteRedWhiteRed