JVC 0105MOC-MW-SC Instructions Manual

1DVD PLAYERXV-N320BXV-N322SINSTRUCTIONS©2005 Victor Company of Japan, LimitedWarnings, Cautions and OthersCAUTIONTo reduce the risk of electrical shocks, fire, etc.:1. Do not remove screws, covers or cabinet.2. Do not expose this appliance to rain or moisture.Caution –– STANDBY/ON button!Disconnect the mains plug to shut the power offcompletely. The STANDBY/ON button in anyposition does not disconnect the mains line. The powercan be remote controlled.IMPORTANT FOR LASER PRODUCTS1. CLASS 1 LASER PRODUCT2. CAUTION: Do not open the top cover. There are nouser serviceable parts inside the unit; leave allservicing to qualified service personnel.3. CAUTION: Visible and invisible laser radiation whenopen and interlock failed or defeated. Avoid directexposure to beam.4. REPRODUCTION OF LABEL: CAUTION LABEL,PLACED INSIDE THE UNIT.GNT0059-004A[EK]EN 0105MOC-MW-SCRegion code of DVD VIDEOThis player can play back DVD VIDEO discswhose region code numbers include “2.”Examples of playable DVD VIDEO discs:The player’s region code is printed on the rear ofthe playerNote of Color system formatThis player accommodates the PAL system, andalso can play back discs recorded with NTSCsystem. (NTSC video signals are converted to anPAL signal and output.)Supplied accessoriesIf anything is missing, consult your dealerimmediately.• Remote control (x 1)• R6(SUM-3)/AA(15F) battery (x 2)V I D E O®ALL 2 52 4231 2 31 5 642CAUTION:• Do not block the ventilation openings or holes. (If theventilation openings or holes are blocked by a newspaperor cloth, etc., the heat may not be able to get out.)• Do not place any naked flame sources, such aslighted candles, on the apparatus.• When discarding batteries, environmental problemsmust be considered and local rules or laws governingthe disposal of these batteries must be followed strictly.• Do not expose this apparatus to rain, moisture, drippingor splashing and that no objects filled with liquids, suchas vases, shall be placed on the apparatus.Caution: Proper VentilationTo avoid risk of electric shock and fire and to protectfrom damage, locate the apparatus as follows:Front: No obstructions and open spacing.Sides: No obstructions in 3 cm from the sides.Top: No obstructions in 5 cm from the top.Back: No obstructions in 15 cm from the back.Bottom: No obstructions, place on the level surface.PrecautionsNotes on the power cord• When you are away on travel or otherwise for an extendedperiod of time, remove the plug from the wall outlet. Asmall amount of power (1.0 W) is always consumed whilethe power cord is connected to the wall outlet.• When unplugging the player from the wall outlet,always pull the plug, not the power cord.• Do not handle the power cord with wet hands!• Disconnect the power cord before cleaning theplayer or moving the player.• Do not alter, twist or pull the power cord, or putanything heavy on it, which may cause fire, electricshock, or other accidents.• If the cord is damaged, consult a dealer and have thepower cord replaced with a new one.Avoid moisture, water, dust, and high temperatures• Do not place the player in moist or dusty places.• If water gets inside the player, turn off the power andremove the plug from the wall outlet, then consultyour dealer. Using the player in this state may causea fire or electrical shock.• Do not expose the player to direct sunlight or place itnear a heating device.Notes on installation• Select a place which is level, dry and neither too hotnor too cold between 5˚C and 35˚C.• Leave sufficient distance between the player and the TV.• Do not install the player in a place subject to vibrations.• Do not put heavy objects on the player.To prevent malfunction of the player• There are no user-serviceable parts inside. Ifanything goes wrong, unplug the power cord andconsult your dealer.• Do not insert any metallic objects, such as wires,hairpins, coins, etc. into the player.• Do not block the vents. Blocking the vents maydamage the player.To clean the cabinet• Use a soft cloth. Follow the relevant instructions onthe use of chemically-coated cloths.• Do not use benzene, thinner or other organic solventsand disinfectants. These may cause deformation ordiscoloring.Playable discs• DVD VIDEO, Audio CD, Video CD, SVCD• DVD-R/-RW written in the DVD VIDEO format• CD-R/RW written in the SVCD, Video CD or Audio CDformat• CD-R/RW written in MP3/JPEG in accordance withthe “ISO 9660” formatSupported Digital audio formats:Linear PCM, MPEG Multichannel, Dolby Digital, DTS (DigitalTheater Systems)*NOTES• If a disc gets dirty, scratched or warped, or due to thedisc characteristics or recording conditions, theplayer may not be able to play back such discs.• The player can play back audio signals recorded inMIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.• With some discs, operations may not be possible.* To play back DTS-encoded DVD VIDEO or DTS-encoded Audio CD discs correctly, connect theplayer to an amplifier with a built-in DTS decoder.Otherwise, playback sound will be distorted.Unplayable discsIf you try to play back discs listed below, noise may begenerated and causes damage to speakers.• DVD-RW written in the VR format• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,PHOTO CD, SACD• Unfinalized discs• Discs of irregular shape or discs with tape, seals orpaste on either the label side or playback side.Playing back these discs may damage the player.The Non-DVD side of a “DualDisc” does not comply withthe “Compact Disc Digital Audio” standard.Therefore, the use of Non-DVD side of a DualDisc onthis product may not be recommended.XV-N320B/XV-N322SWall orobstructionsFloorSpacing 15 cm or moreStand height5 cm or moreFrontV I D E O4Connecting to a TV with component jacksTo switch the scanning mode between Progressive andInterlace, press and hold VFP-I/P on the remote controlfor a few seconds.NOTES• Connect to a TV with composite jacks and set[CONNECTIONS] to [VIDEO COMPONENT] beforeconnecting with component jacks. (See“CONNECTIONS” in “Initial settings.”)• Connect “Y” to “Y,”“P B” to “P B (C B),”“P R ” to “P R(C R)”correctly.• The VIDEO jack, AV OUT terminal, and component(Y,P B , P R) jacks cannot be used at the same time.About the scanning mode indicatorNOTESome progressive TV and High-Definition TV sets arenot fully compatible with the player. To check thecompatibility of your TV, contact your local JVCcustomer service center.Connecting to a stereo audio amplifier (receiver)Connecting to a digital audio deviceTo enjoy high-quality surround sound, connect theDIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTSdecoder or an amplifier with a built-in decoder.NOTES• Depending on the disc, no signal may be outputtedfrom the DIGITAL OUT. Make an analog connectionin this case.• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]preference display correctly according to theconnected digital audio equipment. (See “DIGITALAUDIO OUTPUT” in “Initial settings.”)[PICTURE SOURCE] ofthe PICTURE menuSource type of DVD VIDEOFilm source Video sourceAUTO [DDP] [P]FILM [DDP] [DDP]VIDEO(NORMAL)/(ACTIVE) [P] [P]XIALLEFTRIGHTTREAML OUT AUDIO OUTVIDEO OUTVIDEO PRPBYTo componentvideo inputTo analogaudio inputLEFTRIGHTAUDIO OUTVIDEO OUTVIDEO PRPBYTo analog audio inputCOAXIALLEFTRIGHTPCM/STREAMDIGITAL OUT AUDIO OUTVIDEO OUTVIDEO PRPBYTo digital audio inputTo analogaudio input3ConnectionsBefore making connections:• Do not connect the AC power cord until all other connections have been made.• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of theplayer to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.Connecting to a TV with SCART connectorConnecting to a TV with composite jacksAV OUTININIGHTEFTUDIORLAVIDEOS-VIDEOSCART cable(not supplied)NOTEThe VIDEO jack, AV OUT terminal, andcomponent (Y,P B, P R) jacks cannot beused at the same time.TVThe playerVIDEOPBPRYCOAXIALPCM/STREAMDIGITAL OUTAUDIO OUTVIDEO OUTRIGHTLEFTRIGHTLEFTAUDIOVIDEOINNOTES• If your TV has a monaural audio inputinstead of stereo, use an optional audiocable which converts stereo audiooutput to monaural.• The VIDEO jack, AV OUT terminal, andcomponent (Y,P B, P R ) jacks cannot beused at the same time.Audio/video cable(not supplied)RedWhiteTVThe playerYellow5Turning on the powerInserting the AC power plugAfter all other connections have been made, insert theAC power plug to the wall outlet firmly.Installing the batteries in the remote controlOpen the compartment cover, and place the twosupplied R6(SUM-3)/AA(15F) batteries in the remotecontrol according to the polarity markings (“+” and “–”)inside the compartment. Then replace the cover.The batteries will last about six months with normal use.If the functions of the remote control become erratic,replace the batteries.Precautions of the safe use of batteriesObserve the following precautions for the safe use ofbatteries. If they are used improperly their lives will beshortened, they may burst or their contents may leak.• Remove the batteries from the remote control if it isnot going to be used for a long period of time.• Remove dead batteries and dispose of themproperly.• Never leave dead batteries lying around, take themapart, mix them with other refuse, or throw them intoan incinerator.• Never touch liquid that has leaked out of a battery.• Do not mix new and old batteries, or batteries ofdifferent types, when placing them.Turning on and off the playerPress STANDBY/ON.Initial setupWhen you turn on the player for the first time afterpurchase, the following message appears on the TVscreen.Before enjoying this player, make the initial settings asfollows:1 Press ENTER.2 Press 5/∞ to select the on-screen language forthe preference displays, etc., then press ENTER.3 Press 5/∞ to select the monitor type, then pressENTER.• For a normal (conventional) TV, select “4:3 LB” or“4:3 PS.” (See “MONITOR TYPE” in “Initialsettings.”)• For a wide-screen TV, select “16:9.”4 Press 5/∞ to select a desired digital outputsignal type, then press ENTER.Set this item correctly according to the logo on yourreceiver or decoder.(If you do not connect the player to such a device,press ENTER to finish the setting.)• Receiver/decoder bearing Dolby Digital logo andno DTS, select “DOLBY DIGITAL/PCM.”• Receiver/decoder bearing both Dolby Digital andDTS logos, select “STREAM/PCM.”• Receiver/decoder bearing neither Dolby Digital norDTS logo, or digital recorder, select “PCM ONLY.”To bring up the DVD PLAYER SETUP display laterPress SET UP for a few seconds until the DVD PLAYERSETUP display appears.EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIOSETTINGYES - PRESS ENTER NO - PRESS CANCELMENU LANGUAGE ENGLISHAUDIO LANGUAGE ENGLISHSUBTITLE ENGLISHON SCREEN LANGUAGE ENGLISHDVD PLAYER SETUPENGLISHFRENCHGERMANMONITOR TYPE 4:3 L.B.PICTURE SOURCE AUTOSCREEN SAVERCONNECTIONSONBACKGROUND STSCART RGBANDARDDVD PLAYER SETUP16:94:3 LB4:3 PSDIGITAL AUDIO OUTPUT DOLBY DIGITAL/PCMANALOG DOWNMIX DOLBY PROLOGICD.RANGE CONTROL ONOUTPUT LEVELDVD PLAYER SETUPPCM ONLYDOLBY DIGITAL/PCMSTREAM/PCMSTANDARD8Advanced OperationsOPEN/CLOSELISTSET UPCLEAR– SLOW + DISPLAY ON SCREENENTERSTANDBY/ONVFPI/PCANCEL RETURNSOUNDEFFECTTITLE/GROUP DIMMERAUDIOSUBTITLEANGLESLIDE EFFECTZOOM1 2 34 5 67 8 90THUMBNAIL/TOPMENUMENUNEXTPREVIOUS SELECTChanging the picture tone (VFP)The VFP (Video Fine Processor)function allows you to adjust thepicture character according to thetype of programming, picture tone orpersonal preferences.1 Press VFP-I/P.2 Press 2/3 to select the desiredpreset.NORMAL For watching TV in ageneral room.CINEMA For watching a moviesoftware in a room withsuppressed light.USER1USER2You can adjustparameters that affect thepicture character andstore the settings as a userpreset. See below.To adjust the picture tone1 Select “USER1” or “USER2.”2 Press 5/∞ to select a parameter, then press ENTER.3 Press 5/∞ to adjust the parameter, then press ENTER.4 Repeat step 2 and 3 to adjust other parameters.5 Press VFP-I/P to finish the setting.USER 1BRIGHTNESSGAMMACONTRASTSATURATIONTINTSHARPNESSY DELAY+ 4MID+10+10+10LOW+ 2SelectedPresetParameterGAMMA Adjust this if the neutral color is bright or dark.The brightness of dark and bright portion ismaintained (LOW/MID/HIGH).BRIGHTNESS Adjust this if the picture is bright or dark on thewhole (–16 (darkest) to +16 (brightest)).CONTRAST Adjust this if the far and near position is unnatural(–12 to +12).SATURATION Adjust this if the picture is whitish or blackish(–16 (blackest) to +16 (whitest)).TINT Adjust this if the appearance of flesh tone isunnatural (–16 to +16).SHARPNESS Adjust this if the picture is indistinct (LOW/HIGH).Y DELAY Adjust this if the picture looks separately/overlapped (–2 to +2).Changing the Sound FieldEach time you press SOUNDEFFECT, the Sound Effect modechanges.• As the value becomes bigger, theSound Effect works stronger.Zooming the pictureEach time you press ZOOM, themagnification changes.• You can use 5/∞/2/3 button tomove the zoomed position.To return to the normal playback,select the normal size by pressingZOOM repeatedly.Changing the language, soundand scene angle1 Press the button.2 Press the button repeatedly or5/∞ to select the desired item.3 Press ENTER to finish thesetting.Buttons To doAUDIO For DVD Video:select audio languages.For SVCD/VCD:select the audiochannel.SUBTITLE select the subtitle.ANGLE select the view-angle.7OPEN/CLOSELISTSET UPCLEAR– SLOW + DISPLAY ON SCREENENTERSTANDBY/ONVFPI/PCANCEL RETURNSOUNDEFFECTTITLE/GROUP DIMMERAUDIOSUBTITLEANGLESLIDE EFFECTZOOM1 2 34 5 67 8 90THUMBNAIL/TOPMENUMENUNEXTPREVIOUS SELECTBasic playbackButtons To do3* Start/resume normal Playback7 Stop• When RESUME is ON or DISCRESUME, this playermemorizes the position on thedisc where you interruptedplayback.– To resume playback, press 3.– To stop playback completely,press 7 again.8* Pause• Each time you press the button,the still picture advances to thenext frame.¡/1 Fast forward/backward(While paused)Slow-motion playback• Each time you press the button,the playback speed changes.¢/4 Skip chapter/track• If you press and hold the buttonduring playback, playback isadvanced/reversed at 5 timesnormal speed.VARIABLEPLAYBACK(For DVD Video)The disc is played back at about1.2 or 1.5 times (FAST)/0.8 or 0.6times (SLOW) normal speed.The sound is not muted, and thesubtitle does not go off (except forDTS).(For SVCD/VCD)The disc is played back at about2 times (FAST)/0.5 times (SLOW)normal speed.(Only for DVD Video)The playback position movesback 10 seconds before thecurrent position (only within thesame title).* 38 on the player starts/pauses playback.Changing the display brightnessPress DIMMER to change the brightness ofthe display window.Using the disc menuYou can operate a disc—SVCD/VCD with Playback Control*(PBC)—using the disc menushown on the TV screen.* A method of controlling disc playfor SVCD/VCD by using the discmenu.7 For DVD1 Press TOP MENU or MENU to show the disc menu.2 Press 5/∞/2/3 to select a desired item, then pressENTER or 3 (SELECT).• With some discs, you can also select items by entering thenumber using the numeric buttons.7 For SVCD/VCD1 While stopped, press TOP MENU or 3 (SELECT) toshow the menu.2 Press the numeric buttons to select a desired item.To select 5: press 5.To select 23: press 2, then 3.To select 40: press 4, then 0.• To move to the next or previous page of the current menu,press ¢ or 4.• To return to the previous menu, press RETURN.To play back without PBCWhile stopped, press the numeric buttons instead of 3(SELECT) to start playback.To reactivate PBC• Press TOP MENU or MENU.• Press 7 to stop playback, then 3 (SELECT).Turning on and off the playerOpen/close the disc trayChanging the display windowcontentsEach time you press DISPLAY,the display window contentschanges.Locating the beginning of a sceneor songYou can select a title/chapter/track directly and start playback.For DVD Video:(While stopped) select title.(While playing back) selectchapter.For SVCD/VCD/CD:Select track.To select 5: press 5.To select 23: press 2, then 3.To select 40: press 4, then 0.• If you press TITLE/GROUPbefore entering the number, youcan select the title instead of thechapter.6Basic OperationsWith the label side upTurning on and off the playerInsert a disc1 Press 0 to open the disc tray.2 Place a disc in the disc tray.• To insert an 8-cm disc, place it in the innerrecess.3 Press 0 to close the disc tray.Point toward the remote sensor directly aspossible (the operating range is approx. 5 m.)• Each indicator lights up when correspondingfunction/mode is activated, or correspondinginformation is on the main display.Main displayAbout On-screen guide icons: Playback.: Pause./ : Slow-motion playback with the currentspeed./ : Fast forward/backward playback withthe current speed.: At the beginning of a scene containingmulti-angle views.: At the beginning of a scene containingmulti-audio sounds.: At the beginning of a scene containingmulti-subtitles.You can change the setting so that the on-screenguide icons do not appear on the TV screen. (See“ON SCREEN GUIDE” in “Initial settings.”)XV-N320[EK]5.indd 1XV-N320[EK]5.indd 1 12/27/04 11:16:18 AM12/27/04 11:16:18 AM

/ 2

Related manuals for JVC 0105MOC-MW-SC