JBL Project EVEREST DD66000 User Manual

Also see for Project EVEREST DD66000: Datasheet User guide Brochure & specs Technical manual

Contents

grille removal

JBL Project EVEREST DD66000 User Manual Manual pdf 16 page image

VI. Cut tapes at the corners of the bottom cardboard (drawing VI), slideout the loudspeaker system toward you together with bottom endpads(drawing VI-2).VII. Lift the system slightly on the right and left in turn to remove bottomendpads.VIII. Remove the protective non-wovens.VI VI-2 VII VIIIProducts are shipped with round-tipped spikes on the bottom of the cabinet. Ifyou would like to use pin-point spikes, please refer to figure 6 on page 12, andremove round-tipped spikes and replace them with pin-point spikes. In case,it is hard to loosen, please use 18mm size spanner/wrench.Four metal coasters are also provided. These are to be placed betweenthe foot and the floor should further protection of the floor coverings berequired.Grille RemovalThe EVEREST DD66000 is shipped with its grille on the system. Youcan remove the grille in the following procedures.Step 1: Hold the lower parts of the grille with both hands and pull it up.Step 2: Pull the grille toward you in order to take the grille out of thepins from the cabinet.Step 3: Pull the grille down and remove the grille from the cabinet.Repeat the above procedures in a reverse order in order to install the grille backto the cabinet.