JBL Everest DD66000 Technical Manual

Also see for Project EVEREST DD66000: Datasheet User guide User guide Brochure & specs

JBL Everest DD66000 Technical Manual Manual pdf 1 page image

ACOUSTIC & ELECTRICAL SPECIFICATIONS:• Nominal Impedance 8 Ohms5.5 Ohms @ 85Hz3.5 Ohms @ 40kHz• Max Amp Power 500 Watts*• Frequency Response 45Hz – 50kHz (–6dB)32Hz – 50kHz (–10dB)• Sensitivity 96dB (2.83V @ 1 meter)• Crossover Frequency 150Hz (LF1 6dB/Octave)700Hz (LF2 24dB/Octave)20kHz (UHF 24dB/Octave)SYSTEM COMPONENTS:• Grille 362088-001 (black)362088-002 (white)• Low-Frequency Transducer 15" (381mm) Pulp-cone woofer(1501AL) x 2 (362330-001)DC Resistance 9.2 Ohms, ±10%• High-Frequency Transducer 4" (102mm) Berylliumcompression driver (476Be)(362733-001)DC Resistance 8.0 Ohms, ±10%• Ultrahigh-Frequency 1" (25mm) Beryllium compressionTransducer driver (045Be-1) (362366-001)DC Resistance 3.1 Ohms, ±10%• Crossover Network 361900-004, UHF361900-003, HF361900-001, LF1361900-002, LF2AURAL SWEEP TEST SPECIFICATIONS:• System Aural Sweep Test 6.0V Input 45Hz to 20kHz• L.F.1 Aural Sweep Test 5.0V Input 45Hz to 1kHz• L.F.2 Aural Sweep Test 5.0V Input 45Hz to 1kHz• H.F. Aural Sweep Test 1.00V Input 700Hz to 20kHz• H.F. Aural Sweep Test N/APHYSICAL SPECIFICATIONS:• Dimensions (H x W x D) 38" x 43-5/8" x 18-1/2"(including feet) (965mm x 1109mm x 469mm)• Weight (without grille) 302 lb (137kg) (each)• Weight (with grille) 312 lb (142kg) (each)WARRANTY:• Refer to Warranty Statement packed with each product.* The maximum recommended amplifier power rating will ensureproper system headroom to allow for occasional peaks. We do notrecommend sustained operation at these maximum power levels.Technical ManualEverest DD66000Everest DD66000Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, New York 117978/07FINISHED ASSEMBLY37 6542 PLCS.2 PLCS.2 1PACKAGINGRelease Date 2006Discontinued Date XXXX

/ 5

Related manuals for JBL Project EVEREST DD66000