I-Inc iH182APB User Manual

Contents

I-Inc iH182APB User Manual Manual pdf 11 page image

User’s ManualFRONT PANEL CONTROL• Power Button:Press this button to switch ON/OFF of monitor’s power.• Power Indicator:Green — Power On mode.Orange — Power Saving mode.• MENU / RETURN:1. Turn the OSD menu on/off or return to the previous menu.2. Exit OSD menu when in volume OSD status.• Adjust ▲▼:1. Adjust Brightness and volume when the OSD is off.2. Navigate through adjustment icons when OSD is ON or adjust a function when function isactivated.•【 i 】Button: 《Analog Input Models》1. The OSD menu is used as《confirmation》function during start-up.2. The 「Auto adjustment」 function works only for VGA input. (The auto adjustment function isused to optimize the 「horizontal position」, 「vertical position」,「clock」,and 「phase」.)•【 i 】Button: 《Digital Input Models》1. Press【 i 】to enter Source selections. (Selections include VGA, HDMI, etc. The actualselections may very depending on the models. This function is only available in models withdigital inputs)2. The OSD menu is used as《confirmation》function during start-up.3. Press and hold this button more than 3 seconds will start 「Auto Adjust」 function when usingVGA input only. (The auto adjustment function is used to optimize the 「horizontal position」,「vertical position」,「clock」,and 「phase」.)• Hotkeys:1. Restore Brightness and Contrast defaults:To reset both the Brightness and Contrast to their default values, press the 【▲】and 【▼】 keysat the same time.2. ASPECT RATIO:Press【MENU】+【▼】key to change to 「FULL MODE」 or 「FIT MODE」.3. Change Resolution:For similar screen display resolutions (see table below), the screen resolution can be changed bypressing the【MENU】+【▲】button to achieve the optimal display quality.11