Husqvarna Multi Sling Operator's Manual
Compliance and approvalsThe following standards are applied:• EN 795B:2012• EN 354:2010• EN 566:2017• ANSI Z133-2017• AS/NZS 5532:2013The product accompanied by this set of instructionsis type-examined, CE-marked to state conformity withthe European regulation (EU) 2016/425 on PersonalProtective Equipment (PPE) and meets the Europeanstandards given on the product label. The productdoes however not comply with any other standardsunless explicitly stated. Notified body 0408: TÜV AustriaServices GmbH, Deutschstrasse 10, A-1230 Vienna,Austria.This product was tested to EN 795, Class B, for use by asingle person using Personal Protective Equipment.Pursuant to EN 795, this product for Personal ProtectiveEquipment must be capable of withstanding a force of18 kN in every described mode of use when new.EN 566:2017 and ANSI Z133-2017:• Breaking load to EN 566 at the time of manufacture:22 kN.• The product meets the requirements of the ANSIZ133-2017 standard as regards the requiredminimum breaking load (MBL) for climbing ropesand prusik loops. It does not meet the diameterrequirements for climbing ropes. There exists nodiameter requirement for prusik loops.Declaration of Conformity is available onwww.husqvarna.com. Use the search function andsearch for the product.Responsible manufacturer: Husqvarna AB, SE-561 82Huskvarna, Sweden, tel: +46-36-14650010 1781 - 003 - 13.06.2022 |
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved