Husqvarna HA110 Operator's Manual

Also see for HA 110: Operator's manual Operator's manual Operator's manual

2. Adjust the throttle/speed setting to suit the load.3. When you use a gasoline operated product to cut ahedge, make sure the engine face away from thehedge.4. Do not rush the work, but work steadily until all thebranches have been cut back cleanly.To change the hedge trimmer angle(HA110)WARNING: Never use HA110 with a batteryoperated power unit.1. Loosen the knob.2. Press the cutting unit against the hedge or someother firm surface until the required angle is set.3. Tighten the knob.To change the hedge trimmer angle(HA850)1. Undo the knob.2. Adjust the angle with the help of the handle on thecutting unit.3. Tighten the knob.WARNING: Do not hold the cutting headwhen you adjust the angle. The bladesare sharp and you could easily cutyourself.10 820 - 003 - 07.02.2020