Menu
Husqvarna DXR 145 Operator's Manual
Also see for DXR 145: Operator's manual
                                                                                                                        |
• Battery status (B). The same symbols are alsoshown in the top bar on the display. Refer toSymbols in the top bar on the display on page 13.State of charge SymbolThere are 5 levels of charge for thebattery.Battery fault./Cable connection between the re-mote control and the product.There are 2 buttons for the information center display.The left side button (C) moves to the next symbol in thedisplay. The right button (D) makes the selection.To start the product (DXR 145)WARNING: Restart the product each24 hours to make sure that the productoperates correctly.1. Turn the emergency stop button (A) clockwise todisengage the emergency stop.A2. Open the right hatch on the product.3. Turn the main switch to the ON position. Theheadlight comes on.OFFON4. Close the right hatch on the product.5. Step out of the work area with the remote control.6. Turn the machine stop button (B) clockwise todisengage the machine stop.BCDFE7. If more than one product with remote control is usedin the same workplace, do this procedure to makesure that you have the correct remote control:a) Turn the OFF/ON/START switch to the ONposition (C) to start the remote control.b) Push and hold the headlights button (D) until theconnected product flashes.52 1401 - 002 - 15.10.2021 |
Related manuals for Husqvarna DXR 145
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved