Menu
Husqvarna DS250 Series Operator's Manual
Also see for DS 150: Operator's manualOperator's manualOperator's manualOperator's manualOperator's manual
                                        | |
• Sparks can occur when you operate the product.Make sure that you have a fire extinguisher near.Safety devices on the productWARNING: Read the warning instructionsthat follow before you use the product.• Do not use a product with defective safety devices.• Do a check of the safety devices regularly. If thesafety devices are defective, speak to yourHusqvarna service agent.To do a check of the carriage lock1. Turn the knob to lock the drill motor carriage.2. Feel by hand that the drill motor carriage is locked tothe drill column.Safety instructions for maintenanceWARNING: Read the warning instructionsthat follow before you use the product. Saveall warnings and instructions for futureoperations.• Stop the drill motor, disconnect the power supplyand remove the drill motor before maintenance ofthe product.• Keep all parts in good condition and make sure thatall fixtures are correctly tightened.• Do not use a product that is defective. Do the safetychecks, maintenance and the servicing as given inthis manual. All other maintenance work must bedone by an approved servicing dealer.• Do the maintenance to make sure that the productoperates correctly. Refer toDaily maintenance onpage 10.AssemblyIntroductionWARNING: Read and understand the safetychapter before you assemble the product.To install the wheel kitThe wheel kit is not supplied for all models.• Attach the wheel kit to the bracket at the rear end ofthe bottom plate and tighten the screws.To attach a drill motor (DS150)WARNING: Disconnect the drill motor fromthe power supply.1. Remove the drill bit from the drill motor.2. Lock the carriage lock.3. Put the drill spindle through the collar in the drillmotor carriage.1341 - 002 - 24.10.2019 5 |
Related manuals for Husqvarna DS 150
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved