Husqvarna C 3000 Operator's Manual

Also see for C 3000: Operator's manual Operator's manual Operator's manual

Contents

general safety instructions

3. Pull the bag up from the bag holder and put it aroundthe container.4. Tighten a strap around the bag and the container tosecure the bag to the container.5. Pull the dust bag over the bag holder.6. Close the bottom of the dust bag with a cable tie.MaintenanceIntroductionWhen cleaning and doing service on the product,disconnect the product from the dust extractor.• The product must be cleaned before the product ismoved from the work area.• All other equipment must be seen as contaminated.• Use a cleaning room if it is possible.• Correct personal protective equipment must beused.• All parts that are contaminated must be correctlydiscarded in plastic bags after maintenance is done.Refer to unhealthy dust such as silica dust.TroubleshootingTroubleshootingIssue Cause SolutionUnsatisfactory suction Damages on the hose Replace the hoseThe top cover is loose Adjust the top coverDirt in the flap to the dust bag Clean the flapWARNING: Usepersonal protectiveequipmentSealing is defective Replace the sealingThe toggle latches are loose Tighten the toggle latches6 819 - 002 - 23.11.2018