Husqvarna C 3000 Operator's Manual

Also see for C 3000: Operator's manual Operator's manual Operator's manual

Contents

general safety instructions

WARNING: Do not make holes in theLongopac bag. Risk of dust dispersion.InstallationGeneralWhen unpacking the product, check for damage andthat the accessories are included:• Hose with end fittingsIf any of the accessories are missing, please contactyour local distributor or a sales representative.OperationIntroductionThe pre-separator must be attached to a dust extractorwith the correct capacity.To connect the productConnect the appropriate pre-separator to the grinderand dust extractor according to the illustration. Theoutlet on the top should be connected to the dustextractor (A) and the inlet on the front should beconnected to the grinder (B). On the C 3000 the shorterhose length provided with the pre-separator should beused between the pre-separator and dust extractor.A BTo assemble a new Longopac dustbagWARNING: Always clean the prefilter beforechange of bag collection system.Note: The dust extractor has Longopac system.1. Put the dust bag in the holder.2. Attach the dust bag holder to the container bytwisting it on to the holding pins.819 - 002 - 23.11.2018 5