Husqvarna Automower 310 Operator's Manual

Also see for 315, 320: Operator's manual Operator's manual Quick guide Operator's manual Operator's manual

For Automower® 315X the GPS AssistedNavigation helps the product to select the mostoptimal operation. However, in more complexgardens operation can be improved by carryingout some of the manual settings in theLawncoverage menu.3.9.5.1 To disable the GPS Assisted NavigationOnly for Automower® 315X.Disable the GPS Assisted Navigation to makemanual settings inLawn coverage.Note: It is recommended to use GPS AssistedNavigation.1. Do steps 1–3 inTo get access to the menuon page 23.2. Use the arrow buttons and the OK button tomove through the menu structureInstallation> Lawn coverage.3. Use the down arrow button to selectDisableGPS navigation.4. Push the OK button.5. Use the right arrow button to selectProceedwith disable GPS navigation?6. Push the OK button.3.9.5.2 To enable the GPS Assisted NavigationOnly for Automower® 315X.1. Do steps 1–4 inTo disable the GPSAssisted Navigation on page 26.2. Use the down arrow button to selectEnableGPS navigation.3. Push the OK button.4. Push the BACK button.3.9.5.3 To set the Lawn coverage function1. Do steps 1–3 inTo get access to the menuon page 23.2. Use the arrow buttons and the OK button tomove through the menu structureInstallation> Lawn coverage > Area 1-3 > How?3. Use the left arrow button to select the area.4. Push the OK button.5. Push the BACK button.6. Use the arrow buttons and the OK button tomove through the menu structureInstallation> Lawn coverage > Area 1-3 > How far?7. Measure the distance from the chargingstation to the start of the area. Measurealong the guide wire. Refer toTo measurethe distance from the charging station onpage 27.8. Push the arrow buttons to select thedistance, measured in m.9. Push the BACK button.10. Use the arrow buttons and the OK button tomove through the menu structureInstallation> Lawn coverage > Area 1-3 > How often?11. Use the arrow buttons to select the % of thecutting time the product must cut the area.The % is equal to the % of the area inrelation to the complete work area.a) Measure the area.b) Divide the area with the work area.c) Convert the result to %.30%20%26 - Installation 1220 - 001 -