Husqvarna AUTOMOWER 310 Operator's Manual

Also see for 315, 320: Operator's manual Operator's manual Quick guide Operator's manual Operator's manual

WARNING: Use the plug to disconnectthe charging station, for instancebefore cleaning the charging station orrepairing the loop wire.WARNING: Place the low voltagecable and adjust the cutting height sothat the blades on the blade disc cannever come in contact with the cable.WARNING: To reduce the risk ofdamage to electrical components,disconnect all connections to thecharging station (power supply,boundary wire and guide wires) if thereis a risk of a thunderstorm.For more instructions on how to do a properinstallation, see chapterInstallation in thecomplete Operator's manual on Husqvarna'swebsite www.husqvarna.com.3.2 Control panelAll commands and settings for the product aremade via the control panel. All functions areaccessed via a number of menus.The control panel consists of a display and akeypad. All information is shown on the displayand all input is done using the buttons.Note: The display texts are shown in English inthe manual, but you will see the texts on theproduct display in the chosen language.3.3 Display Automower® 105When the STOP button has been pressed andthe hatch is opened, the operation windowappears showing the time, selected operatingmode, number of mowing hours, battery statusand timer setting.• The clock shows the current time.• Date shows the current day.• The number of operating hours indicates thenumber of hours since the day ofmanufacture that the product has been inoperation. The time that the product hasspent mowing or searching for the chargingstation is counted as operating time.•AUTO,MAN orHOME show which mode ofoperation is selected.• The battery status shows the remainingbattery charge.• The ECO symbol is displayed if the productis set inECO mode.• The clock symbol indicates when the timersettings are set. The clock symbol is blackwhen the product is not allowed to mow dueto a timer setting.• TheMENU text illustrates that the mainmenu can be reached by pressing the multi-choice button that is located under the text.3.4 Keypad Automower® 105The keypad consists of 4 groups of buttons:• The START button is used to activate theproduct. This is normally the last button tobe pressed before closing the hatch.• The 3 multi-choice buttons offer variousfunctions, depending on where in the menustructure you are.• The number keys are used for instance toenter the PIN code or time settings.• The operation selection button issymbolised by a house. When the buttonhas been pressed, the selected operationmode is shown in the display.3.5 Display Automower®310/315/315X/420/430X/440/450XWhen the STOP button has been pressed andthe hatch is opened, the following information isdisplayed:12 - Installation 903 - 001 - 21.09.2018