Husqvarna AUTOMOWER 105 Operator's Manual

Also see for 315, 320: Operator's manual Operator's manual Quick guide Operator's manual Operator's manual

6.1.1 Indicator lamp in the charging stationFor a fully functional installation, the indicator lamp in the charging station must emit a solid orflashing green light. If something else appears, follow the troubleshooting guide below.There is more help on www.husqvarna.com. If you still need help, please contact your localHusqvarna representative.Light Cause ActionGreen solid light Good signals No action requiredGreen flashinglightThe signals are good andECO modeis activated.No action required.Blue flashing light The boundary loop is not connectedto the charging station.Check that the boundary wire con-nectors are fitted properly to thecharging station.Break in the boundary loop. Find out where the break is. Replacethe damaged section of the loop witha new loop wire, and splice using anoriginal coupler.Red flashing light Interruption in the charging station’santenna.Contact your local Husqvarna repre-sentative.Red solid light Fault in the circuit board or incorrectpower supply in the charging station.The fault should be rectified by anauthorized service technician.Contact your local Husqvarna repre-sentative.7 Transportation, storage and disposal7.1 TransportationThe supplied Li-ion batteries obey theDangerous Goods Legislation requirements.• Obey all applicable national regulations.• Obey the special requirement on packageand labels for commercial transportations,including by third parties and forwardingagents.• For how to remove the battery, refer tothe complete Operator's manual onwww.husqvarna.com.7.1.1 How to lift and move the productTo safely move from or within the work area:1. Push the STOP button to stop theproduct. If security is set to the medium orhigh level the PIN code has to be entered.The PIN code contains four digits and isselected when you start the product forthe first time. Refer to completeOperator's manual.2. Switch off the product with the mainswitch or the ON/OFF button.24 - Transportation, storage and disposal 1418 - 002 -