Husqvarna AUTOMOWER 105 Operator's Manual

Also see for 315, 320: Operator's manual Operator's manual Quick guide Operator's manual Operator's manual

• For Automower® 315X/430X/450X: Thesatellite symbol is shown when the GPS-supported navigation is activated. Symbol(A) is shown when the symbol has madecontact with a sufficient number of GPSsatellites. Symbol (B) shows when theproduct has not made contact with asufficient number of GPS satellites.Symbol (A) blinks during the first days theproduct is working, as it is collecting GPSinformation about the installation.A B• The ECO symbol is displayed if theproduct is set inECO mode.• The black clock symbol (A) is shownwhen the product is not allowed to mowdue to aSchedule setting. If the productis not allowed to mow due toWeathertimer, symbol (B) is shown. If theoperation modeOverride schedule ischosen, symbol (C) is shown.A B C• The battery status shows the remainingbattery charge. If the product is loading, aflash is also shown over the batterysymbol (A). If the product is placed in thecharging station without charging, (B) isshown.A B• The height adjustment setting is displayedas a scale/numerical value.• For Automower® Connect@Home (refertoAutomower® Connect@Home on page20): An icon for Bluetooth® wirelesscommunication will appear in the productdisplay when connection with your mobiledevice has been established.3.6 Keypad Automower®305/310/315/315X/420/430X/440/450XThe keypad consists of 6 groups of buttons:• The START button is used to activate theproduct. This is normally the last button tobe pushed before closing the hatch.• The BACK and OK buttons are used tonavigate in the menu. The OK button isalso used to confirm settings.• The arrow button are used to navigate inthe menu but also to make selections incertain setting options.• The MENU button is used to go to themain menu.• The PARK button is used to send theproduct to the charging station.• The number buttons are used to entersettings, for example PIN code, time orexit direction.3.7 The indicator lamp Automower®305The indicator lamp on the ON/OFF button isan important status indicator:• The product is active if the indicator lamplights continuously.• The product is in standby if the indicatorlamp flashes. This means that theoperator must push the ON/OFF button tomake the product active again.• The product is disabled when theindicator lamp is not lit.16 - Installation 1418 - 002 -